Celect SAS908XWHB-7-DF1 Manuale - Pagina 4
Sfoglia online o scarica il pdf Manuale per Controllore Celect SAS908XWHB-7-DF1. Celect SAS908XWHB-7-DF1 10. Waterline master control controller
Stampa la pagina
2. Setting Temp – Room Temp ≥1℃, heating output on (Fast heating or slow heating, see configuration
menu 6 items)
3. Room Temp – Setting Temp ≥1℃, heating output off,
In standby mode press ③ button under the above three seconds, Through the
adjustment according to the ④ buttons preservation.
Step
Press buttons
(factory default）
1
Press P Button
2
Press P Button
3
Press P Button
4
Press P Button
5
Press P Button
6
Press P Button
7
Press P Button
8
Press P Button
9
Press P Button
10
Press P Button
11
Press P Button
2.display for implied parameters：
In standby mode, shortly press button
more than 3seconds, enter implied parameters setting； the first item, setting the temperature coefficient： Press
change set temperature, short press button
、
when long press button
Configuration setting
Displayed
Press▲、▼to select
( )
-
（
）
℃（
（
）
℃(
℉)—
（ ）
（
）
(
)
( )
( )
(
)
(
)
(
)
to start； Shortly hold
more than 3 seconds, show that DEF flash 3 times, all parameters setting return to
Select temperature display adjustment higher or
--- +
lower
Select maximum room temperature limitation
℉）—
℃（
℉）
℉） Select minimum room temperature limitation
℃（
Changes the display readout to Centigrade or
/
Fahrenheit as required
Backlight mode
：no backlight
/
/
：backlight maintain 5 sec
：backlight maintain 15 sec
Start heating conditions: when setting temperature
< room temperature from the heat, when setting
~
temperature ≥ room temperature reduction db
parameters start heating
Program option
： 7 days separately （Refer table 1 and table
2） ；
/ / /
： 5+1+1（Refer to table 3 and table 4）
： 5+2（Refer to table 5 and table 6）
： Non programmable
Programming period in one day option
/
6-6 time zones；4-4 time zones；
Time scale
/
： 24hour system;
Intelligent Recovery Option
：Without intelligent function
/
:Active intelligent function
Language
/
Chinese/English.Factory default: English.
enter modify the time；Long press
enter implied parameters, setting other parameters，
4
After
button adjustment,
、
Descriptions
： 12hour system