Great White GW9500 Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Aspiratore per piscina Great White GW9500. Great White GW9500 12. Automatic pool cleaner

Stampa la pagina

Hazardous suction. Stop pump before

attempting to clean pool cleaner.

• Keep skimmer basket and pump strainer basket clean

and free of debris.

• If cleaner jams with large debris (leaves, sticks, etc.),

try cleaning debris first from bottom of unit. If this

doesn't clear unit, remove top swivel assembly (turn

1/4 turn) and clear the debris from the top.

• Remove the pool cleaner from the pool before super

chlorinating (shocking) or chemical balancing. Wait at

least four hours after the chemical procedure before

reinstalling the cleaner.

• Make sure that the cleaner's brush bristles don't

become deformed during storage. Store the unit so

that it doesn't sit on the bristles and so that nothing

compresses them.

• If possible, do not coil the hose. Remove the hose from

the cleaner when removing the cleaner from the pool.

Store the hose flat and straight.

• Periodically examine bristles and vacuum skirt for

wear or distortion. Replace if necessary. See

"Assembly", Page 9.

Best: Hose stored correctly – laid

out straight, not connected to

cleaner.

ABOUT MAINTENANCE AND CARE

HOSE STORAGE

OK, Not Recommended: Hose is

disconnected from cleaner and

loosely coiled (no sharp bends).

• If necessary to remove oscillator, see "Disassembly",

Page 8.

• Don't store the cleaner with the hose connected to the

cleaner body or with the hose coiled. To do so will

cause the hose to take a set or kink over a period of

time. When reinstalled in the pool, the hose will tend

to stay coiled and will cause the cleaner to malfunc-

tion.

• If the hose has taken a set, uncoil it as far as possible

without damaging it and lay it out in the sun for sev-

eral hours to straighten itself. Once it has relaxed and

straightened out, store it laid out flat and straight (no

coiling) if possible. If no storage area is available that

will allow this, coil the hose as loosely as possible and

expect to have to let it straighten for a while before

using the cleaner again.

• Make sure the lift brush is retracted during storage or

else that the cleaner is supported such that the lift

brush is not taking any of the cleaner's weight. If the

lift brush is down during storage and the cleaner rests

on it, the brush bristles will collapse over time and the

cleaner will no longer turn during operation as it was

designed to do.

Wrong: Storing cleaner with hose

connected will damage hose and

void the hose warranty.