HiBoost Commercial 20K Pro Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Estensore HiBoost Commercial 20K Pro. HiBoost Commercial 20K Pro 20. Mobile signol booster

fully reread and understand the LCD, LED indications, control buttons and MGC

function on your booster, as they will help you identify and solve any potential

issues.

LCD Features

Working

Uplink

Downlink

Frequency

Gain

Output

Power

Relative signal

power from tower

Alarm

status Indicator

power status

ISO

Antenna Isolation

Status Indicator

Band Shut Off Indicator

Automatic Level Control

(ALC)Activity Indicator

SET

DEC-

INC+

Band: Shows the working frequency bands where the booster is operating.

UL/DL: Shows real-time uplink and downlink gain(dB). These values will change

slightly as the ALC or ISO makes changes to the gain to optimize coverage.

Power: Shows real-time downlink power(dBm) that the booster is delivering to

the indoor antenna port. When the booster DL output power is lower than -

10dBm, the value will display "---".

ISO: When the system does not have enough isolation between the outdoor and

indoor antennas, the "ISO" indicator will be flashing showing that the ISO has

lowered the gain in some bands to keep the system from oscillating. Press the

"SET" key and the LCD screen will turn on to help with troubleshooting and

display "ISO" value showing the current band or bands affected.

ALC: When the booster is receiving too much DL power from the tower and the

DL booster output is close to saturating, the "ALC" indicators will flash showing

that the ALC has lowered the gain to prevent this overload condition. Press the

"SET" button and the screen will turn on to help with troubleshooting and show

the band or bands affected.

10/19