HiBoost Dot 2.0 Manuale di installazione - Pagina 10

Sfoglia online o scarica il pdf Manuale di installazione per Estensore HiBoost Dot 2.0. HiBoost Dot 2.0 12.

Stampa la pagina
DL GAIN OUTPUT POWER
LTE700
>=60dB
>=-5dBm
CELL800
>=60dB
>=-5dBm
DL GAIN OUTPUT POWER
LTE700
>=60dB
>=-5dBm
CELL800
>=60dB
>=-5dBm
Note:
Some customers have some misunderstandings about boosters, and we would like to clarify
it here:
If you can't even get a stable 1 bar outside the house or on the roof, then we suggest you
return it as it won't work in areas with very weak signal, the same is true of all boosters on the
market.

Technical Specifications

Model No.
Working Band
UL Frequency Range(MHz)
DL Frequency Range(MHz)
Supported Standards
Max. Gain
Max. output power
MGC (Step Attenuation )
I/O Port
Impedance
Environment Conditions
Dimensions
Weight
Power Supply
　Normal but No Boosted Signal
LED LIGHT PATTERN
ISO（Alarm） light
solid blue
NORMAL
LED LIGHT PATTERN
ISO（Alarm） light
solid blue
Band 5 / Band 12 / Band 13
824-849/698-716/776-787
869-894/728-746/746-757
CDMA, LTE
60 dB
UL 18 dBm,DL 10dBm
≥ 25 dB / 1 dB step
SMA-Female
50 ohm
IP40
6.77*4.41*0.75in
≤ 3.3 lbs / 1.5 kg
Input AC100~240 V, 50/60 Hz, Output DC 5 V / 3 A
09
REASON
1、The band is not
supported
2、The Signal is from
other carriers
REASON
Dot
SOLUTION
Check the band you are using
again. If it stays at band66,get
into the 'detail'/'setting' of
gagues on Signal Supervisor
and switch off RF switch of
AWS2100, then adjust the
outdoor antenna again. It would
be better if there are two
persons and one can stay near
the indoor antenna to check if
the signal is boosted.
SOLUTION