HiBoost Home 10K Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Estensore HiBoost Home 10K. HiBoost Home 10K 20. Mobile signal booster

1.2 Installation Preparation

Before you install

- Make sure you have sufficient cable length between the proposed

outdoor/indoor antenna location and booster connector.

. Make sure the position you install the booster is near to an existing electrical

outlet, well ventilated, and away from excessive heat, moisture, and direct

sunlight.

Tools Required

Phillips Screwdriver

Drill

Mobile Phone

Before you get started, you will need to plan the layout of your system. This

involves finding the location with the strongest received signal from the cellular

tower, as well as antenna, booster, and cable placement.

General installation steps:

1. Find the strongest received signal for the location of the outdoor antenna.

2. Install the outdoor antenna on the roof to obtain the strongest downlink signal

from the local cellular towers. It should also be as far away as possible from

where you plan to place the indoor antenna (vertical separation is more

important than horizontal separation).

. Install the indoor antennas where you want to improve the signal level.

4. Mount the booster, connect the cables from the outdoor antenna and indoor

antenna at the designated ports, and connect the booster to the AC supply

(make sure all the cables are connected before applying power).

1.3 How to find the location with the strongest received signal

The outdoor signal strength the booster receives directly affects the efficiency of

the indoor coverage. That is why it is crucially important to install the antenna at

a good location and point it properly towards a tower where signal reception is

the strongest.

There are many methods that can be used to find the strongest signal from the

cellular towers. One is to use the LCD display on the booster that shows the

downlink power output of the booster in each band, the other is to use a mobile

phone or mobile phone app to test signal strength, and the third is to use a

5/18