HiBoost Mini F08GI-5S-BTW Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Estensore HiBoost Mini F08GI-5S-BTW. HiBoost Mini F08GI-5S-BTW 14.

7 FREQUENTLY ASKED QUESTIONS

WHY ARE THE LED LIGHTS TURNING FLASHING GREEN, FLASHING

RED OR SHUTTING OFF?

There are certain cases where your system could be experiencing

oscillation. This can be attributed to either the quality of your input signal

or having your outdoor antenna and indoor antenna too close together. Please review

the following guidelines to help resolve this issue:

1. Adjust the direction of the outdoor antenna. If the system is receiving a very high

input signal, you can point your outdoor antenna away from the cellular tower to

reduce the strength of the input signal and therefore, reduce the oscillation.

Alternatively if your system is receiving a very poor quality signal (weak and

unusable signal), you can point your outdoor antenna more directly towards the

cellular tower to increase the strength of the input signal. Sometimes this may

require completely repositioning the antenna to a location where you can achieve

a line of site to the tower.

2. Increase the separation between the outdoor antenna and the indoor antenna.

This can be achieved by increasing the distance between the two antennas or by

placing barriers between them, such as moving the indoor antenna to an adjacent

room where there would be an additional wall separating them from the outdoor

antenna.

3. Manual Gain Control. Adjust the gain with the manual gain control function using

the dip switches on the side of the booster.

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. End users must follow the specific operating instruction for

satisfying RF exposure compliance. This transmitter must not be co-located or

operating in conjunction with any other antenna or transmitter.

12 / 14