HiBoost F10G-CP Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore di segnale HiBoost F10G-CP. HiBoost F10G-CP 20. Cellular 3g signal booster

• BOOSTER – select location

•Install the booster in an area that is protected from the weather, properly

ventilated and is away from excessive heat and moisture.

• DONOR ANTENNA (OUTDOOR)‐ select location

•Mount the signal (outdoor) antenna in an elevated outdoor location so

that it points towards the cellular tower and away from where the inside

antenna will be located.

• OUTDOOR COAXIAL CABLE ‐ select location

•The outdoor coaxial cable is used to connect the donor (outdoor) antenna

to the booster.

• INDOOR COAXIAL CABLE‐ (if used)

•The indoor coaxial cable is used to connect the server (indoor) antenna to

the booster.

• SERVER ANTENNA (indoor)

•The ideal location for the distribution antenna will be the area of your

property where you need to improve the signal most.

•NOTE:The signal strength will be strongest closest to the antenna.

•IMPORTANT: The signal antenna (outdoor)should always be separated from the

distribution antenna (indoor)by at least 20 vertical feet including the separation of

a thick barrier such as a roof or a wall. Depending on the strength of your outdoor

！

signal, the weaker the signal the less separation distance is required.

•LIGHTNING SURGE PROTECTOR‐ (SOLD SEPARATELY)

•The lightning surge protector connects in between the signal antenna and the

booster.

•IMPORTANT: Lightning surge protector must be grounded.

• COMMISSIONING THE SYSTEM