Emeril Lagasse PPC771 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Pentola a pressione elettrica Emeril Lagasse PPC771. Emeril Lagasse PPC771 17.

Stampa la pagina

Instructions for Pressure Lid Assembly

INNER LID ASSEMBLY

REMOVING LID

1. Hold the Knob on the underside of the Inner Lid and pull

to remove the Inner Lid (see Fig. i).

INSERTING INNER LID

1. Ensure that the Knob on the underside of the Inner Lid is facing

outward, away from the Lid.

2. Ensure that the Inner Lid Rubber Gaskets are properly attached

to the Inner Lid (see Fig. ii-a & ii-b).

3. Press the Inner Lid onto the Lid and press the hole on the Inner

Lid onto the Center Knob on the underside of the Lid (see Fig. iii).

4. Ensure that Knob is visible when the Inner Lid is in place and that

the Inner Lid Rubber Gaskets are positioned evenly and onto the

rim of the Inner Lid (see Fig. ii-a).

CHANGING OR CLEANING THE INNER LID

1. Hold the Knob on the underside of the Inner Lid and pull

to remove the Inner Lid (see Fig. i).

2. Pull off the Inner Lid Center Gasket (see Fig. iv) and the Inner Lid

Outer Gasket (see Fig. ii-b).

3. Clean the Inner Lid Rubber Gaskets after each use. Inspect the

Inner Lid Rubber Gaskets to ensure that they are clear of debris.

4. Place the new or clean Inner Lid Center Gasket in the hole

in the Inner Lid (see Fig. v). Attach the new or clean Inner Lid

Outer Gasket to the outside of the Inner Lid. When properly

attached, the Inner Lid Rubber Gaskets should sit evenly.

5. Ensure that the Knob on the Inner Lid is facing outward, away

from the Lid. You should be able to see the Knob (see Fig. ii-a).

6. Press the Inner Lid onto the Lid and press the hole on the Inner

Lid onto the Center Knob on the underside of the Lid (see Fig. iii).

7. Ensure that Knob is visible when the Inner Lid is in place and that

the Inner Lid Rubber Gaskets are positioned evenly and onto the

rim of the Inner Lid (see Fig. ii-a).

Emeril Lagasse Pressure Cooker Plus™ | Models: PPC771, PPC772 & PP772P

FIG. i

FIG. ii-a

FIG. ii-b

FIG. iii

FIG. iv

FIG. v

Instructions for Pressure Lid Assembly

FLOAT VALVE AND RED PRESSURE

INDICATOR ASSEMBLY

1. Remove the Lid from the Unit and remove the Inner Lid

(see INNER LID ASSEMBLY, p. 14).

2. Pull off the Rubber Gaskets at the bottom of the Float Valve and

Red Pressure Indicator (see Fig. vi). Remove the Red Pressure

Indicator through the top of the lid. The Float Valve will be loose in

its chamber.

3. Inspect that no food is stuck in the chambers and run water

through them to clean them. Be cautious not to submerge the

whole Pressure Lid.

4. When the chamber is clear of debris, turn the Pressure Lid right

side up to allow the Float Valve to drop into the Float Valve

Chamber on the underside of the Lid. Turn the lid to the side so

you can view the Float Valve

5. Stick a pin or paperclip into the hole on the side of the Float Valve

(see Fig. vii; the pictured pin is not included).

6. With the pin or paperclip inserted into the side hole, slide the

Rubber Gasket onto the Float Valve, ensuring that the wider side

of the Rubber Gasket is against the Pressure Lid (see Fig. viii). The

Rubber Gasket should be snug on the Float Valve.

7. Remove the pin or paperclip (see Fig. vii).

8. Insert the Red Pressure Indicator into the lid. Use your finger to

hold the Red Pressure Indicator in place. While holding the Red

Pressure Indicator in place, slide the Rubber Gasket onto the Red

Pressure Indicator, ensuring that the wider side of the Rubber

Gasket is against the Pressure Lid. The Rubber Gasket should be

snug on the Red Pressure Indicator.

PRESSURE RELEASE VALVE ASSEMBLY

NOTE: DO NOT ATTEMPT TO ASSEMBLE OR DISASSEMBLE

THE PRESSURE RELEASE VALVE WHEN THE EMERIL

LAGASSE PRESSURE COOKER PLUS IS IN USE.

1. Pull to remove the Pressure Release Valve (see Fig. ix).

2. Ensure that the Pressure Release Valve and holes are not blocked

by food or debris. If blocked, wash out or use a pin to unblock.

3. Look at the clip on the underside of the Pressure Release Valve

(see Fig. x). It should not be damaged or severely bent.

4. Press the Pressure Release Valve back into the hole on the Lid.

If the Valve does not insert correctly, it may have a bent clip.

FIG. vi

FIG. vii

Insert

Remove

FIG. viii

FIG. ix

FIG. x

Emeril Lagasse Pressure Cooker Plus™ | Models:PPC771, PPC772 & PP772P