DaytonAudio WAVE-LINK WLRX Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Ricevitore DaytonAudio WAVE-LINK WLRX. DaytonAudio WAVE-LINK WLRX 4. Wave-link wlrx 2.4 ghz expansion receiver

Stampa la pagina

Introduction

Installation of a subwoofer or second audio zone can be next to

impossible in a ﬁnished home. Lack of access from below or above the

room limits your ability to run the required cables from the A/V receiver

to your subwoofer or speakers.

The Dayton Audio Wave-Link™ WLRX 2.4 GHz Expansion Receiver

lets you introduce an additional wireless audio zone into your Wave-

Link WLS System.

NOTE: A Wave-Link WLS Wireless System is required to use this receiver.

*5 receivers can be used with one transmitter.

The stereo capability of the Dayton Audio Wave-Link Wireless Audio

System extends the options and uses of your primary audio system.

Use the Wave-Link to add speakers to your patio, around your pool, or

anywhere you'd like to enjoy music. Connect the Wave-Link to your PC

and stream music from an Internet source or your music library to your

main audio system.

Connection

The Dayton Audio Wave-Link WLRX Wireless Audio Receiver includes all

of the accessories you need for monaural or stereo installations. The 3.5

mm to RCA cable is used for mono applications such as connecting a

subwoofer. The 3.5 mm to dual RCA cable is used for stereo applications

such as adding rear speakers to your home theater system.

System Includes

• 1 x Receiver

• 1 x 3.5 mm to single RCA

• 1 x 3.5 mm to dual RCA

• 1 x 3.5 mm to 3.5 mm cable

• 1 x 5 VDC power adapter

Operation

Start by powering your receiver. To do so, connect a USB power

adapter to the receiver. Plug the USB power adapter into a 120 VAC

outlet. Now, press the pair button on the top of the WLRX receiver unit.

When unit has a steady blue light, it is paired.

Connect your cable to the line input of your subwoofer, powered

speakers, or remote ampliﬁer, and the 3.5 mm plug into the receiver

line output.