GreatLite Professional Series Istruzioni per l'uso e manuale delle parti - Pagina 3
Sfoglia online o scarica il pdf Istruzioni per l'uso e manuale delle parti per Torcia elettrica GreatLite Professional Series. GreatLite Professional Series 4. Led flashlight
Stampa la paginaoperating Instructions and Parts manual
oPerAtING INstrUCtIoNs
- Basic operation: Slightly touch the tail switch to turn on the flashlight.
- One touch of the function switch makes 100% luminance, a second touch of the switch makes 50%
luminance, one more touch of the switch makes 25% luminance, one more touch of the switch makes SOS and
a last touch of the switch makes flash mode.
bAtterY rePLACemeNt
1. Screw off the tail and install the battery. Note that the positive pole of the battery shall align with the head,
and then screw down the tail. Uses (1) 18650 battery. Screw down the tail.
Use AND mAINteNANCe
- Please do not dismantle the sealing parts at the head, otherwise, it will lead to invalid repair and even destroy the
flashlight.
- Please use quality batteries only. When the flashlight is not to be used for a long period of time, take out the
battery, otherwise, the flashlight may be destroyed due to leakage or explosion of poor quality batteries.
- After a long period of use, the o-ring of the flashlight may wear out. In this case, please replace the o-ring to
maintain the water-proof performance of the flashlight.
- Frequently clean the flashlight surface, particularly the tail switch.
- If the flashlight flashes abnormally or does not come on, it may be caused by the following:
- Reason 1: Low battery power.
Solution: Replace the battery (note positive and negative poles when installing the new batteries.)
- Reason 2: The conduction contact surface or other contact surface/point of the thread or the PCB is dirty.
Solution: Use alcohol cotton swabs to clean the conduction contact surface or point.
If the above methods do not work, please contact GreatLite customer service.
ProFessIoNAL serIes
e36-e02 LeD FLAshLIGht
3
eXPe36-e02