GAI-Tronics Titan Manuale d'installazione e d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Telefono GAI-Tronics Titan. GAI-Tronics Titan 14. Illuminated crossing telephone

4. Make the necessary connections

5. Secure the telephone front plate to its rear enclosure,.

6. Offer the complete telephone up to the required mounting location.

7. Pass a proprietary banding strap round each of the pole mounting clamps

and support pole.

8. Tighten the straps firmly and trim off any excess band material. For

additional security the driving head of the band may be sawn off.

9. Connect and test the installation.

3.3 Post Mounting

Kit No 100-02-0209-001

For mounting telephones onto the top of 2 inch (50.8mm) diameter posts.

1. Slacken the socket grub securing screws at the base of the bracket (3mm

socket wrench required) and locate it on top of support post.

2. Tighten both screws firmly so that the post is seated against the internal

walls of the bracket. Ensure that approximately 200mm of cable emerges

from the top of the post.

3. Remove the telephone front plate from the rear enclosure as described

under Vertical Surface or Wall Mounting.

4. Offer the rear enclosure into position on the bracket with cable passing

through the entry gland.

5. Pass about 150mm of cable through the gland and tighten it firmly on to the

cable.

Titan Illuminated Crossing Telephone

Figure 11 – Post mounting