DaytonAudio DAX66 Manuale d'uso - Pagina 11
Sfoglia online o scarica il pdf Manuale d'uso per Impianto stereo DaytonAudio DAX66. DaytonAudio DAX66 19. 6-source 6-zone distributed audio system
Stampa la paginaDAX66 INSTALLATION — PRE-AMP OUTPUTS
Using the DAX66 PRE-AMP OUTPUTS
!
The DAX66 provides six stereo, unbalanced, line level PRE-AMP outputs, which correspond to the six-zone outputs. The PRE-AMP
outputs can be used to connect powered subwoofers to a zone or additional amplifiers to expand the available power in a large zone or
multiple zones.
The DAX66 can be used as the master controller in large commercial audio systems with constant voltage 25/70V amplifiers connected
to the PRE-AMP outputs.
The PRE-AMP output levels are variable and are controlled from the DAX66 keypad, Infrared remote, or RS232 from an automation
system. For best performance, the PRE-AMP output cables should be less than 25 feet long and be high-quality, shielded cables.
4 ~ 8 ohm
speakers
Powered Subwoofer
daytonaudio.com
Stereo mode
70 volt speakers