DynaGen Tough Series Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Controllore DynaGen Tough Series. DynaGen Tough Series 12. Digital generator controllers

Stampa la pagina

Using the Remote

Using the Remote Panel

This section discusses how to use the remote.

Using the Menu System

Task

Entering Menu

Navigating Menu

Change a Setting

Scroll Parameters

Lock Screen

Events History

Front Panel Item s

Item

3.1

Power Up

Whenever the remote panel is pow ered up it w ill attempt to register w ith the local controller. This happens on every pow er

up.

Registration is a pairing process that establishes a communication link. Once established the remote panel and local controller

can communicate w ith each other.

TOUGH Series Manual

Description

When in the OFF mode, press the enter button to bring up the menu.

Once in the menu, use the up and dow n arrow s to navigate. Pressing enter w ill move you

into that menu.

Scroll to the desired value and press enter to select. A check mark should appear beside

that item. Press enter again to save the setting and return to the previous screen.

When in Auto or Running mode, pressing the up and dow n arrow s w ill scroll through the

parameter pages.

When in Auto or Running mode, the screen can be locked to a certain parameter page by

pressing Auto and unlocked by pressing Auto again.

Once in the menu, select Events History to view the most recent controller event. Use the

up and dow n arrow s to navigate to other events. The controller can store up to 150 events.

If more than 150 events occur, the oldest event is deleted to make room for the next event.

Nam e

Description

Off Button

Used for turning off the engine or exiting out of Auto mode. This is not

intended to function as an Emergency Stop as there are conditions in

w hich it w ill not shut dow n the engine. See the OFF Button Function

section for more information.

Auto Button

Used for placing the controller into AUTO mode or locking the LCD screen

w hen view ing parameters. Once in AUTO mode, the controller w aits for

a start command to be received.

Run Button

Used to start the engine manually. The Off button must be used to shut

dow n the engine if it has been started using the front panel.

Up/Speed Increment

Used for moving around in the menu, changing a setting's value, or

Button

incrementing the engine speed in manual mode.

Scroll/Enter Button

Used for entering the menu system, accepting settings, or changing the

currently displayed parameter page.

Dow n/Speed

Used for moving around in the menu, changing a setting's value, or

Decrement Button

decrementing engine speed in manual mode.

Engine LED

Green = Engine running w ith no issues

Amber = Engine running w ith w arnings

Red = Engine shut dow n on failure