Automatic Technology AM-808 Istruzioni per l'installazione
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Apriporta del garage Automatic Technology AM-808. Automatic Technology AM-808 4.
Stampa la pagina
Smart Phone Control Kit
Garage Door Openers
TRANSCEIVER KIT NTR-1V1 - ORDER NO. 14825
ITEM
DESCRIPTION
1
NETWORK TRANSCEIVER NTR-1V1 AY
2
TIMING HARNESS 400MM VR12 AY
3
TAPTITE SCREW "P" M4 X 12
4
VELCRO 20 X 50
Any changes or modifications not
expressively approved by Automatic
Technology could void the user's
authority to operate this equipment.
This device allows for unattended operation of the door when not in line-of-sight of the
door opener.
The door may operate unexpectedly, therefore do not allow anything to stay in or near the path of the
door. When the door is not operating automatically, watch the door when it is moving and keep people
away until the door is completely opened or closed. Contact with the moving door can cause serious
personal injury or damage to property.
Your opener must be fitted with SAFETY BEAMS. Safety Beams detect any obstructions in
the door's path and override automatic operation if one presents. These must be installed as
in accordance with UL 325 and CSA C222.2 No 247.
This is in addition to regular professional servicing, and monthly obstruction tests as detailed in your
opener's Home Owners Manual.
Important Safety Instructions
WARNING!
ELECTROCUTION!
CAUTION:
Fall from ladder
Doc # 160064_02
Part # N/A
Released 21/07/16
Transceiver Installation Instructions
QTY
1
1
2
1
•
DO NOT attempt to disassemble, repair or modify the product. This will invalidate
the warranty.
•
Do not allow children to play with the Base Station or your smart phone if the
B&D phone app has been installed.
•
Keep the device away from water and other liquids. In the event that water or
other liquids enter the device, power off he product immediately and clean the
device.
•
To reduce the risk of fire or electric shock, do not expose this device to rain or
moisture. The device should not be exposed to dripping or splashing.
•
DO NOT remove the cover as there are no user-serviceable parts inside.
•
Ensure ladder is the correct type for job.
•
Ensure ladder is on flat ground.
•
Ensure user has 3 points of contact while on ladder.
CLASS B DEVICE
This equiment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encourage to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3 (B)