GAI-Tronics 709-901 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore GAI-Tronics 709-901. GAI-Tronics 709-901 16. Smartseries handset/speaker amplifier

Stampa la pagina

709-901 S

ODEL

MART

Optional Features

The following features are available as options to the standard configuration of a station used in an

ADVANCE system and installed in a standard SmartSeries or a custom enclosure. These features can be

configured. Contact the GAI-Tronics Field Service Department at 800-492-1212 inside the USA or

610-777-1374 outside the USA for further information about these features.



The Selected Page Destination feature allows the manual selection of one of four page destinations.



The Supervised Input feature allows the monitoring and supervision of one or two initiating device

circuits (IDCs), initiating an alarm when the supervised device is activated.



The Power Relay Module provides a relay contact output, typically to switch power to a visual

signaling device, for directed or relay group operation. Supervision of the controlled device's cable

can also be enabled.



The Station Emergency Party Line feature supports annunciation for two party lines.

Maintenance

Regular inspection and a good preventive maintenance program will increase the reliability of your

GAI-Tronics station. The GAI-Tronics Field Service Department can formulate a service contract suited

to your facility's specific need for preventive maintenance.

If the equipment requires service, contact your Regional Service Center for a return authorization number

(RA#). Equipment should be shipped prepaid to GAI-Tronics with the return authorization number and a

purchase order number. If the equipment is under warranty, repairs will be made without charge. Please

include a written explanation of all defects to assist our technicians in their troubleshooting efforts. Call

800-492-1212 for help in identifying the Regional Service Center closest to you.

WARNING

Before performing any of the following preventive maintenance steps, remove

all power from the station.

1. Inspect and replace frayed or cracked wiring.

2. Secure/replace loose wires and spade terminals.

3. Remove corrosion from terminals.

Fuses

WARNING

Do not remove fuses when energized. Replace with the same type and size fuse.

F1 = 0.2A, 250V, 0.251.25 inches, Slo-Blo type, UL Listed

F2 = 0.7A, 250V, 0.251.25 inches, Slo-Blo type, UL Listed

F3 = 0.15A, 250V, 0.251.25 inches, Slo-Blo type, UL Listed

f:\standard ioms - current release\42004 instr. manuals\42004-699l2d.doc

10/13

ERIES

ANDSET

PEAKER

MPLIFIER

. 42004-699L2D

7 of 14

AGE