Greatneck 25892 Manuale - Pagina 2

Sfoglia online o scarica il pdf Manuale per Strumenti Greatneck 25892. Greatneck 25892 4.

D. Push the grease cartridge into the barrel until the pull-tab rim contacts the rim of the barrel (see

figure 4). Then remove the pull-tab seal from the end of the grease cartridge.

E. Screw the head back onto the barrel.

F. Unlock the T-handle from the end cap making sure that the rod and rubber plunger assembly

are still connected. (You should feel some resistance when you push on the rod handle.)

G. To prime the grease gun: Apply pressure to the rod handle by standing

the grease gun on a workbench and pushing down on the barrel while

pumping the handle at the same time. (see Figure 5) If you gun has an air

vent valve, open it; if not, slightly unscrew the head as you pull down on

the barrel.

H. Pump the handle several times until grease flows from the coupler.

SAFETY

Work safely with tools by wearing safety goggles.

GLASSES

Use lentes de seguridad para trabajar de manera segura con las herramientas,

SYMBOL

Travaillez en sécurité. Portez des lunettes de sécurité lorsque vous utilisez des outils.

Back:

HOW TO SUCTION LOAD YOUR GREASE GUN:

A. Unscrew the head from the barrel. Pack head with grease.

B. Insert the open end of the barrel about 2 inches into the bulk grease. (see figure 6)

C. Slowly pull the rod handle while pushing the barrel deeper into the grease.

D. When the rod is fully extended, lock the rod into place. Remove the barrel from the grease.

E. Screw the head back onto the barrel.

FIGURE 4

FIGURE 5