GAI-Tronics PHP400 Manuale d'installazione e d'uso - Pagina 13
Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Telefono di emergenza GAI-Tronics PHP400. GAI-Tronics PHP400 20. Analogue version (1090/1099 series) with ampetronic hls-dm2 induction loop amplifier 230v ac power supply
Anche per GAI-Tronics PHP400: Manuale d'installazione e d'uso (20 pagine), Manuale d'installazione e d'uso del progetto (20 pagine)
Stampa la pagina
CAUTION - changing this level may cause the phone to be too loud or too quiet,
and in extreme cases could affect the semi duplex operation.
To set the phone back to its factory default volume setting use
*72 26 #
TMA
7.3.
GAI-Tronics TMA is a fully featured software application (Telephone Management
Application) for Windows™, offering the facilities to program, maintain, monitor and
report on all types of GAI-Tronics SMART products.
Full details on the configuration and use of TMA are provided with the package itself.
Contact GAI-Tronics for further details.
TMA part numbers:
TMA package (UK):
TMA package (Europe):
Each package includes the TMA software (including comprehensive help
documentation and installation instructions), external modem and dongle.
Induction Loop Amplifier
8.
The induction loop amplifier is factory set and should need no adjustment under normal
circumstances. The amplifier is an Ampetronic HLS-DM2 unit, and its operating manual can
be found at the following web address:
https://www.ampetronic.co/wp-content/uploads/2018/03/UP17902-3-HLS-DM2-Handbook-
hi.pdf
Cleaning
9.
Recommended cleaning methods are outlined below:
Normal Cleaning
9.1.
For normal cleaning we recommend "Virosol", manufactured by Clover products.
Carefully follow manufacturer's instructions for storage, handling and use.
Stainless Steel Push-buttons
9.2.
Stainless steel push-buttons, where fitted, should be cleaned regularly especially if the
Help Point is in a marine environment. The stainless steel may show signs of
discolouration or rust – this will not damage the buttons or impair their performance but
may look unsightly and can be cleaned off using normal cleaning agents as above. In
extreme cases a mild abrasive may be necessary.
Graffiti
9.3.
For graffiti, paint and ink we recommend the use of 3M GR1 graffiti stain remover.
CAUTION: This is a very aggressive chemical. Pay close attention to the manufacturer's
recommendations for storage, handling and use.
Anti-Graffiti Coating
9.4.
Where polyurethane anti-graffiti coating or paint has been specified (as an option), it
can be cleaned using Methylated Spirits or Methyl Isobutyl Ketone. Other cleaners can
be used but should be tested on a small area first.
100-02-0309-001
100-02-0309-002
PHP400 Analogue Help Point.
13