Automatic Technology FHCRX-1V2 Istruzioni per l'installazione - Pagina 3
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Ricevitore Automatic Technology FHCRX-1V2. Automatic Technology FHCRX-1V2 4. Multi-frequency receivers
Stampa la pagina
SPECIFICATIONS
Technical Specifications
Power supply
Frequency
Memory Capacity
Programmable Modes:
Controlling Outputs
Relay Contact Rating
Antenna Wire Length**
*Timer mode available with ATA's Universal Programmer.
** An optional co-axial antenna is available for use with the receiver in difficult reception areas. The antenna has to be mounted as high as
possible so that it is not obstructed, e.g. on top of a fence, or on a wall at the front of a garage, etc. Connect the core of co-axial lead to replace
the existing antenna wire (inner screw socket). Connect shield to the spare (outer) screw socket.
OPTIONAL EXTRAS
CO-AXIAL CONNECTION
An optional coaxial antenna is available for use with the receiver in
difficult reception areas. The antenna has to be mounted as high as
possible so that it is not obstructed, e.g. on top of a fence, or on a
wall at the front of a garage, etc. Connect the core of coaxial lead
to replace the existing antenna wire (outer screw socket). Connect
shield to the spare (inner) screw socket.
PG3-CONNECTOR
SHIELD
ANTENNA
PWR SKT NC NO COM
FHCRX-1V2 and FHCRX-2V2
12V - 24V AC or DC
Multi Frequency
250 Transmitters
Pulse, Hold, Timer*
FHCRX-1V2 1 x Common
1 x Normally Open
1 x Normally Closed
FHCRX-2V2 2 x Common
2 x Normally Open
2 x Normally Closed
1 amp @ 24 volts DC
170mm
1
A
B
LED
SW1
SW2
JP2
JP1
C
NC NO COM
D
E
F
FHRX-2V2
9V - 24V DC ONLY
Multi Frequency
250 Transmitters
Output 1:
Open collector output at pin one for channel
one (40 dc volts 100 ma max)
Output 2:
Open collector output at pin four for channel
two (40 dc volts 100ma max)
N/A
170mm
HARNESS
2
3
4
The harness to connect receiver to the opener can be bought from
ATA (Order code #01905). User may have to cut and strip wires to
connect to different openers. Cut and leave white wire if the second
channel is not used.
26 NOM
RED
BLUE
WHITE
BLACK
HARNESS TO USE WITH RECEIVER
5
6
380
BLUE
WHITE
BLACK
RED
-
-----
------
DESCRIPTION
ITEM
DWG NO.
Automatic Technology Aust
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
6-8 FIVEWAYS BLVD, KEYSBOROUGH, 3173
DRAWING IS THE SOLE PROPERTY OF
AUTOMATIC TECHNOLOGY AUSTRALIA Pty Ltd.
PHONE: (03) 9791 0200
ANY REPRODUCTION IN PART OR AS A WHOLE
WEB: www.ata-aust.com.au
WITHOUT THE WRITTEN PERMISSION OF
AUTOMATIC TECHNOLOGY AUSTRALIA Pty Ltd.
IS PROHIBITED.
GENERAL TOLERANCES:
TITLE:
********
DECIMAL: 0.X
0.1
RADIUS:
0.5
0.XX
0.05
CHAMFER:
0.5 x 45
ANGLE:
0.5
SURFACE FINISH
DEBUR AND BREAK SHARP EDGES
DRAWING NO.
NAME
DATE
**.**.**
1 : 1
PART NO.
SCALE:
7
-
----
REQ'D
MA
FAX: (03) 9791 0
********
*****