GAI-Tronics 714-001 Manuale - Pagina 4
Sfoglia online o scarica il pdf Manuale per Involucro GAI-Tronics 714-001. GAI-Tronics 714-001 6. Speaker amplifier enclosure
Stampa la paginaModel 714-001 Speaker Amplifier Enclosure
In certain circumstances, it may be necessary to re-terminate some or all of the enclosures in a system.
When this is done, wires should be stripped back to clean copper, have new lugs applied, and be
reconnected to each terminal.
In some cases, contaminants from the plant atmosphere enter the enclosure. Often, a solvent contact
cleaner is not strong enough to wash the buildup away. If this occurs, try the following steps:
1. Disconnect power from the enclosure.
2. Disconnect all wires from the terminal strip inside the box.
3. Spray the interior of the enclosure with a heavy-duty, surfactant-type, water-based industrial cleaner.
Heavy concentrations of contaminants may be scrubbed with a scrub pad or a soft brush.
4. Rinse the interior of the box with a water spray, and blow out any excess water using compressed air.
5. Apply a coating of water-displacement solution followed by contact cleaner and compressed air.
6. Re-lug all terminations. Wires should be striped back to clean copper before re-lugging.
7. Reinstall the amplifier. Reapply the power.
TROUBLESHOOTING
The following suggestions are provided to aid a technician in troubleshooting.
Problem
Feedback during page of nearby
handset station.
Crosstalk
Specifications
Construction/Finish ...... ...............................................................Cold-rolled steel/gray polyurethane finish
Mounting ...................... .......................................Wall or column, four .312-inch diameter mounting holes
Connections.................. .............................................................Internal Screw-type barrier terminal blocks
Dimensions................... ............................... 8.12 H x 8.12 W x 4.06 D inches (206.4 x 206.4 x 128.6 mm)
Shipping Weight........... .................................................................................................. 5.5 pounds (2.5 kg)
Part Number
10440-002
12508-002
12535-001
61509-005
\\s_eng\gtcproddocs\standard ioms - current release\instr. manuals (42004)\42004-154a.doc
2/97
Solution
Use the muting feature in the amplifier enclosure at the terminal
blocks.
One or more system cable pairs may be improperly terminated.
Visually inspect the system cable for accidental crossing of
cable pairs or grounds.
REPLACEMENT PARTS
Description
Maintenance Assembly
Captive Screw Kit
Hardware Kit for Harness
Assembly
Harness Assembly
4 of 6
Page:
Pub. 42004-154A