Dynalink Wireless LAN Client USB WLL013 Manuale di configurazione rapida - Pagina 6

Sfoglia online o scarica il pdf Manuale di configurazione rapida per Router wireless Dynalink Wireless LAN Client USB WLL013. Dynalink Wireless LAN Client USB WLL013 10. Wlan pcmcia card/usb adaptor

Stampa la pagina

Setting Up Wireless Privacy

4.1

WEP

WEP is for protection against eavesdropping and prevention of access from

unauthorised wireless stations. Both 64 and 128 bit encryption are supported.

The 128 bit option is more secure but it impacts more on the effective throughput

of the network than the 64 bit option.

The WEP setting is determined on an existing network by the network

administrator. Only if you are setting up a new network there is the option on

the WEP setting.

Before you start you should know:

The type of encryption, 64 or 128-bit.

The encryption keys.

The key number to be used.

Open or shared key authentication.

These settings must be identical to those on the access point or wireless stations.

If the network you are connecting to uses no encryption, go to Encryption and

check that the setting is disabled.

If the network is protected by WEP:

Select Encryption from the

Wireless LAN Cards Monitor Utility.

Choose 64 or 128 Bit encryption.

Enter the WEP keys in either HEX or

ASCII. Note that in HEX format only

digits 0-9 and letters A-F are accepted.

The four keys, including the one

selected as WEB Key to use, are used

to decrypt the data you receive.

In the WEP Key to use box, select the

key number to encrypt data.

Select Open System or Shared Key

for authentication type. To enable the

settings, click the Submit button.

4.2

MAC ADDRESS FILTERING OR ASSOCIATION CONTROL

Some access points block access from unauthorised clients by registering the

MAC address of all authorised clients. If the network uses this function you must