HID Signo 25B Manuale d'uso - Pagina 9
Sfoglia online o scarica il pdf Manuale d'uso per Controllore HID Signo 25B. HID Signo 25B 18. Biometric reader/controller
Anche per HID Signo 25B: Manuale di installazione (2 pagine), Manuale di installazione (2 pagine)
Stampa la pagina
Powering
Trusted Identities
1.4 Hardware reset the Signo 25B
Resetting the Signo 25B device to factory defaults should, where possible, be carried out through the HID
Biometric Manager application. Refer to the HID Biometric Manager Administration Guide (PLT-04029). In
the event that communication between HID Biometric Manager and the Signo 25B is not possible, carry out
the following hardware reset at the reader:
1. Unscrew the installation locking screw from the bottom of the Signo 25B mounting bracket.
2. Slide the Signo 25B upwards and remove from the mounting bracket.
3. From the back of the reader, remove the label that covers the contacts.
4. With power supplied to the reader, short the contacts together using a suitable metal object.
5. Maintain the short for a full five seconds. The Signo 25B will beep while you hold the short.
6. One long beep of two seconds confirms the reset. All device settings will be returned to the default.
You will need to install and update the device in order to return it to the former working level.
PLT-04900, B.1
HID® Signo™ Biometric Reader 25B
9
User Guide
March 2021