GAIN EXPRESS NF-838 Manuale di istruzioni - Pagina 12
Sfoglia online o scarica il pdf Manuale di istruzioni per Apparecchiature di prova GAIN EXPRESS NF-838. GAIN EXPRESS NF-838 16. Multipurpose lcd display cable test & inspection instrument
Stampa la paginaNormal test result of BNC line is shown as below:
Hunting test
Press "ON/OFF" key of the
sound. Slightly touch "hunting" key and enter hunting mode, LCD screen
displays the following in flashing:
Dismount battery cover of the emitter,install the battery of 9V,cover the battery cover
and press "ON/OFF" key, then the emitter will start working. Connect cable to be
hunted to corresponding port of the emitter (RJ45, RJ11, USB, BNC, 1394 and
others),slightly touch "SCAN" key,enter signal hunting mode and select corresponding
frequency according to the requirement (there are 9 kinds of frequency can be
selected, one kind of frequency signal will be changed when "SCAN" is pressed for
once and the signal frequency type is switched from 1~9 in circulation); then open
battery cover of the receiver, install battery of 9V, cover the battery cover and take
the receiver to hunt target wire (the usage of receiver is s hown in the following) .
Press "backlight" key to make backlight source is on when the test is conducted in
dim environment.
Usage of the receiver
Dismount the battery cover, install battery of 9V, take the receiver with thumb pressing
"PUSH" key, then approach the cable with probe and find target wire required in
numerous cables. When the probe is near target wire, the "beep, beep and beep"
sound may occur and the signal indicator light "POWER" will turn on.Compare volume
of "beep,beep and beep" and luminance of signal indicator light,the wire of which the
sound is the loudest and the signal indicator light is the brightest is target wire required.
, the equipment is started up with a long
emitter
-08-