DynaLock 3101B-TJ101 Istruzioni per il montaggio
Sfoglia online o scarica il pdf Istruzioni per il montaggio per Serrature DynaLock 3101B-TJ101. DynaLock 3101B-TJ101 4. Electromagnetic lock
Anche per DynaLock 3101B-TJ101: Istruzioni per il cablaggio (13 pagine)
Stampa la pagina
705 Emmett Street Bristol, CT 06010
1-877-DynaLock www.dynalock.com
PLEASE DELIVER THIS MANUAL
TO THE END-USER UPON COMPLETION
OF THE INSTALLATION
FOR PRODUCT SUPPORT AND PARTS
ORDERING INFORMATION CONTACT:
DynaLock Corp.
705 Emmett Street
Bristol, CT 06010
Bus: (877) 396-2562 Toll-Free
(860) 582-4761
Fax: (860) 585-0338
DYNALOCK ON THE INTERNET:
E-mail: [email protected]
Website: www.dynalock.com
GWXT Auxiliary Lock
FWAX Special Locking Arrangements
CSFM California State Fire Marshal
3101B-TJ101 INSTALLATION MANUAL
MODEL3101B-TJ101
ELECTROMAGNETIC LOCK
MOUNTING INSTRUCTIONS
Page 8
705 Emmett Street Bristol, CT 06010
1-877-DynaLock www.dynalock.com
The Series 3101B-TJ101 is a 1500 pound holding force delay egress top jamb-mounted electromagnetic lock designed
to secure a single-inswinging door. The lock requires both installation procedures as described herein and in the
separate wiring instructions included.
Note: This device is not intended for use on emergency exit doors.
Typical installations of the lock on single-inswing doors:
LEFT HAND DOOR
Care must be taken that the lock face and armature face are kept free of dirt, rust, paint, or any other obstruction
which may interfere with the lock and armature making good contact. These faces may be cleaned with a non-
abrasive pad and wiped with an oil dampened cloth.
Familiarize yourself with the door and frame conditions. The lock must mount rigidly to the face of the door frame
header. The door mounted armature is supplied with an adjustable mounting bracket and hardware that allows it
to pivot slightly to compensate for reasonable misalignment.
NOTE:
If this lock is supplied with the DSM option be certain that disc magnets are present inside the
armature housing.
After mechanical installation is complete the lock needs to be wired to a 12 or 24 VDC/VAC power source. Once low
voltage power is supplied the unit is fully operational. All other wiring is for selected options. Refer to the separate
wiring instructions included for further information.
02/11
3101B-TJ101 INSTALLATION MANUAL
MODEL 3101B-TJ101
ELECTROMAGNETIC LOCK
MOUNTING INSTRUCTIONS
INSTALLATION DESCRIPTION
RIGHT HAND DOOR
HANDLING
MECHANICAL INSTALLATION
ELECTRICAL INSTALLATION
Page 1
02/11