Hiddn coCrypt B Selfkey Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Modem Hiddn coCrypt B Selfkey. Hiddn coCrypt B Selfkey 5.

G. Zeroizing (Factory Resetting) a coCrypt B:

This zeroize process will reset your coCrypt B to its original factory state. Any data stored in the

device will be lost and cannot be retrieved after the zeroizing process has started. Make sure you

have securely backed up any data information you want to keep prior to starting this zeroizing

process.

You may choose between two methods to perform the zeroizing process:

Method 1:

1. Begin the process using the already installed SIM-card.

2. Press and hold the

will show in the display. Remove your finger from the

3. Press the

several times until the message «Zeroize coCrypt» is displayed.

4. Press the Enter knob

5. Press the

. The «Y» is displayed. Press

6. Wait 2-3 seconds until the message "Zeroize completed" shows in the display.

7. Remove the hiddn coCrypt from the computer and then reinsert it. After a few seconds the

display will show the message "Zeroize completed" followed by "Please Restart".

8. Remove the coCrypt B once more from the PC. It will automatically power off.

9. You may continue using the same SIM-card or you may insert a new one from a hiddn Keycard

(see points 1 & 2 in section A).

10. Then follow the regular first time setup procedure in section B.

Method 2:

1. Disconnect coCrypt B from the PC and make sure it is turned off.

2. Press and hold the "3" button

3. While holding these two down, press and hold the Power on button

4. fter 2-3 seconds, the message "Zeroize completed" shows in the display.

5. Remove the coCrypt from the computer to turn the coCrypt B off. Then reinsert the coCrypt B

into the computer again. It will automatically turn on and after a few seconds the display will

show the message "Zeroize completed" followed by "Please Restart".

6. Remove the coCrypt B once more from the PC. It will automatically power off.

7. You may continue using the same SIM-card or you may now insert a new one from a hiddn

Keycard (see point 1 & 2 in section A).

8. Then follow the regular first time setup procedure in section B.

CC01-UM-B01-02.12-ENG-01.12.16

knob while inserting the coCrypt B into the PC. The text "admin menu"

. The display will show "Confirm [Y/N]".

and the Enter

knob.

to confirm.

button down.

down.