Hiddn KryptoDisk 2 Manuale di installazione rapida

Sfoglia online o scarica il pdf Manuale di installazione rapida per Tastiera Hiddn KryptoDisk 2. Hiddn KryptoDisk 2 2. Selfkey model
Anche per Hiddn KryptoDisk 2: Manuale d'uso (17 pagine), Manuale d'uso (16 pagine)

Stampa la pagina

KRYPTODISK 2

USER PRIMARY AND USER DATA RESTORE

QUICK

INSTALLATION GUIDE

SECURITY FIRST

As any type of storage device may

unexpectedly fail we strongly

recommend that you store and backup

any valuable or critical data. Consult

your IT-department for guidelines or

consider using at least two independent

storage devices for critical data

General information

Introduction

Please read through this guide

thoroughly before powering up your

KryptoDisk.

IMPORTANT:

Incorrect use may lead to loss of

data. Read the security information

section before first time use.

Remove the protection shield

from the display before use.

If the KryptoDisk is new and

uninitialised or has been zeroized,

you will need to prepare it for first

time use, see section "First time

use".

Full user guide available at

hiddn.no/support

First time use

Step 1. Initialise

Plug the KryptoDisk into a USB port

and follow instructions on the display.

You will be asked to restart your

KryptoDisk. Restart the KryptoDisk by

unplugging it from the USB port and

then plugging it back.

Security information

Procedure for lost user primary card

Zeroize your device to invalidate your

primary card.

Insert user data restore card. Enter

PIN from the PIN/PUK card.

Follow instructions in the display

When device is initialised and restore

data card activated you will have

access to your data again.

Make a back-up of your data and

order a new set of cards.

Follow procedure for new set of

cards.

Admin menu

To enter the Admin menu, press and

hold the '0' key while powering on the

device.

Use the '0' key to navigate in the

Admin menu.

Disclaimer

Hiddn accepts no liability for any consequential, incidental, direct or indirect damage (including but not limited to loss of productivity, loss of business profits, business

interruption, loss of business information and similar events causing losses to business or other consequential economic loss) arising from any action and/or inaction based on

information contained in this document. Hiddn accepts no liability for any loss of data and/or company and/or personal information that may result from any action and/or inaction

based on information contained in this document. Users are instructed to have backups of all data prior to installation of any device or products described herein. Users are

recommended to have separate backup of all data. All Hiddn KryptoDisk parts are Hiddn parts, and Hiddn does not accept any liability for any direct or indirect loss related to the

handling and/or mishandling of any of the parts and/or combination of the parts provided in this package. Hiddn reserve the rights to at any time and without notification change

its offer and/or price and/or availability of parts.

Rev. no 1.03.KD-SHE-15.02.18.

Hiddn's advantage

Designed, produced and assembled in Norway

All trademarks and brand names are the property of their respective owners

PACKAGE INCLUDES



KyptoDisk 2 and case



USB Cable



User primary and user data restore card



PIN/PUK card

Use of primary and restore card

PLEASE REMEMBER TO KEEP THE USER DATA RESTORE

CARD AND THE CARD WITH PIN AND PUK INFORMATION IN

A SECURE PLACE.

IF YOU USE YOUR USER DATA RESTORE CARD WE

STRONGLY RECOMMEND A BACK-UP OF ALL DATA

STORED ON YOUR DEVICE.

Step 2. PIN code

Insert the primary user card and enter

the PIN printed on the PIN/PUK card.

The PIN can be changed later from

the admin menu.

New set of cards

If you activate the user data restore

card, please order new set of cards

as soon as possible from your

reseller, distributor or

[email protected].

Procedure with new set of cards

Zeroize unit from the Admin

menu.

Follow procedure for "First time

use".

Restore data from your back-

up.

Other admin features

The admin menu provides detailed

system information, enables you to

change PIN and set the device name.

Please note that PIN, PUK and

other security parameters are not

stored by Hiddn and cannot be

recovered if lost.

ALPHANUMERIC

KEYBOARD

* ON/OFF

* BACK

* BACKSPACE

0: OPENS ADMIN MODE

USE '0' KEY TO NAVIGATE IN THE

ADMIN MENU

Step 3. Formatting the disk

Please use Disk Management

(Windows) or Disk Utility (macOS) to

initialise and format your KryptoDisk.

You will find a guide on the next page.

After formatting the disk drive your

KryptoDisk is ready for use.

PIN Recovery

The PUK code can be used to restore

access to a device that has been

locked due to too many incorrect PIN

attempts.

A PUK can reopen the smart card

and set a new PIN.

The PUK cannot be changed.

Important security functions from the admin menu

Zeroize

Zeroize wipes all settings and

invalidates the smart card in addition

to restoring the device back to factory

default settings.

The user data restore card will

recover data from an invalidated

primary user card and zeroized

device. If you invalidate the data

restore card, your data is lost.

OLED

DISPLAY

# ENTER

User primary card

This is your primary keycard with a pre-

set PIN found on your PIN/PUK card.

PIN can later be changed from the

Admin menu.

User data restore card

The user data restore card is your back

up if you have lost or invalidated your

primary user card.

Use of data restore card will require

that you have the original PIN from the

PIN/PUK card available.

New set of user cards

If you use the user data restore card,

please order new set of user cards as

soon as possible from your reseller,

distributor or [email protected].

Security recommendation

To ensure the best security for your

device and protection of your data we

recommend that you keep the key

card and KryptoDisk separated when

not in use.

If your primary card is lost, stolen or

broken please invalidate the primary

card as soon as possible. See section

"procedure for lost user primary card".

The Zeroize function is used for

invalidating user primary card and

resetting the device to factory settings.

Please note that invalidating of both user

primary and user data restore card will

require new set of cards. A new set of

cards will not restore data.

Support

www.hiddn.no/support

[email protected]