DB Drive NEO-M4 Quide di avvio rapido - Pagina 2
Sfoglia online o scarica il pdf Quide di avvio rapido per Amplificatore DB Drive NEO-M4. DB Drive NEO-M4 2. Neo micro series power amplifier
Stampa la pagina
NEO-M2
LIMITED WARRANTY
DB DRIVE warrants any products purchased in the U.S.A. from an authorized DB DRIVE
dealer. All products are warranted to be free from defects in material and workmanship under
normal use and service for a period of (1) year when the unit installed by an authorized DB
DRIVE dealer. Non-authorized dealer installed products carry a (1)year parts and labor
limited warranty. This warranty applies to the original purchase only.
DB DRIVE will either repair or replace (as its option) any unit that has been found to be
defective and under warranty provided the defect occurs within:
One (1) year if purchased through an authorized DB DRIVE dealer. This limited warranty
does not extend to units that have been subjected to misuse, abuse, neglect, or accident.
Products that in DB DRIVE's judgment shows evidence of having been altered, modified,
or serviced without DB DRIVE's authorization, will be ineligible under this warranty.
To obtain warranty service please contact your retailer or see our website www.dbdrive.net
for more details.
All warranty claims must be handled directly through the
authorized DB Research dealer they were originally purchased from
NEO M1
Output Power @ 14.4 VDC, 2Ω
1 x 500W
Output Power @ 14.4 VDC, 4Ω
1 x 250W
Power Supply Input Voltage
12.0VDC to 14.8VDC
THD (1KHz @ 4Ω)
0.04%
Bandwidth (-3 dB)
18Hz - 22KHz
Damping Factor (1KHz @ 4Ω)
100
S/N ratio (as weighted @ 1 Volt)
99db
Input Sensitivity
.0.2MV - 6V
Minimum Load Impedance
2Ω
Low-Pass filter range
50Hz ~ 150Hz
Sub-Sonic Filter Range
15Hz ~ 50Hz
Bass Boost
45 Hz @ 0 ~ 12dB
NEO M2
Output Power @ 14.4 VDC, 2Ω
2 x 250W
Output Power @ 14.4 VDC, 4Ω
2 x 125W
Output Power @ 14.4 VDC, 4Ω Bridge
1 x 500W
Power Supply Input Voltage
12VDC to 14.8VDC
THD (1kHz @ 4Ω)
0.04%
Bandwidth (-3dB)
18Hz- 22KHz
Damping Factor (1k Hz @ 4Ω)
100
S/N ratio (as weighted @ 1 Volt)
99dB
Input Sensitivity
0.2MV - 6V
Minimum Load Impedance
2Ω
High-Pass Crossover filter range
15Hz - 300Hz
Low-Pass Crossover filter range
50Hz - 300Hz
NEO M4
Output Power @ 14.4 VDC, 2Ω
4 x 100W
Output Power @ 14.4 VDC, 4Ω
4 x 50W
Power Supply Input Voltage
12VDC to 14.8VDC
THD (1kHz @ 4Ω)
0.04%
Bandwidth (-3dB)
18Hz- 22KHz
Damping Factor (1k Hz @ 4Ω)
100
S/N ratio (as weighted @ 1 Volt)
99dB
Input Sensitivity
0.2MV - 6V
Minimum Load Impedance
2Ω
Due to continuous improvement of the product the Specifications are subject to change without notice.
TM
DB Research L.L.P. - 302 Hanmore Industrial Parkway - Harlingen, TX 78550
Ph: (877) 787-0101 - Fax: (956) 421-4513 - www.dbdrive.net