DB Drive SA1600.4 Manuale d'uso - Pagina 7
Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore DB Drive SA1600.4. DB Drive SA1600.4 8. Speed series
Anche per DB Drive SA1600.4: Manuale d'uso (9 pagine)
Stampa la pagina
(
SA 600.4, SA 800.4
SA 600.4, SA 800.4 and SA 1600.4 ampli ers are equipped with a variable crossover
n
etwork that allows you to select the crossover mode (Highpass—Full Range) and desired
crossover point for channels 1 and 2. Channels 3 and 4 allow you to select between a
Highpass 12db slope, a 12db Stereo Lowpass / Bandpass slope and a mono 24db Lowpass /
Bandpass slope. For example if you wish to drive a pair of subwoofers on channels 3 and 4
out the high frequencies with a 24db slope. You will then need to adjust the Lowpass
control to the desired frequency setting (make sure to have the Highpass control set to
switch to LP/BP stereo. Once the LP/BP stereo switch setting is selected you will use both
any unwanted low frequencies with a 12db slope.
All manuals and user guides at all-guides.com
, SA 1600.4 )
( SA 1300.1D, SA 1600.1D, SA 2000.1D, SA 3000.1D )
The SA 1300.1D, SA 1600.1D, SA 2000.1D and SA 3000.1D are equipped with a variable 24dB Slope
feature a variable Bass Boost EQ is set at 45Hz. In some subwoofer enclosure installations it
may necessary to use the Phase Shift feature. The Phase Shift button sets the Subwoofer
subwoofer enclosure. All SA
mono amps are also equipped with Multi-Linking technology.
When using a single SA mono amp set the Master / Slave switch to the Master position.
the slave setting the front panel controls become inoperative. All adjustments for both
Multi-Link
Diagram
RCA input
SA
Select Master
Master Amp
Master controls
Slave Amp
Slave controls are void
Select Slave
2 ohm minimum