Dynamax AVRD 3.2 Manuale di installazione e funzionamento - Pagina 10

Sfoglia online o scarica il pdf Manuale di installazione e funzionamento per Controllore Dynamax AVRD 3.2. Dynamax AVRD 3.2 12. Voltage regulator

Stampa la pagina

SYSTEMS WITH VOLTAGE REGULATION

Model

Flow2

Flow32-A

Flow32-B

Flow32-C

FLGS-TDP

FL32-GS8

FL32-GS16

FLDL-TDP

DL2e

DL3000

SV1 (Delta-T Devices Kit)

The specific sensor excitation voltage requirements are found in the installation manual for

that sensor. To determine the voltage for specific conditions and the type of sensor refer

to the sensor installation manual. The following table gives a quick picture of the typical

voltage requirements.

SENSOR REQUIREMENTS

Model

SGA2-3

SGA5

SGA10-SGB25

SGB35-SGA70

SGA100

TDP-10-50

TDP-80

TDP-100

4.0 Safety and Maintenance

PRECAUTIONS

1. The AVRD series regulators are not waterproof. The AVRD's should be installed in

protected enclosures, NEMA 2,3 or 4 rated.

2. The regulator is internally protected from over-current. Nevertheless, do not short output

(+) leads to ground or minus leads. This can cause damage to wires, the regulator and

eventually burn up the device.

3. In addition to over-current latching AVRD is protected by an external in-line fuse 15A; 5 x

20mm (considering 5A max current on each).

Regulator Included Standard

Internal 1A

AVRD

(2) AVRD

AVRD

(2) AVRD

Type

Dynagage Microsensors

Dynagage Microsensor

Dynagage Stem Gauges

Dynagage Trunk Gauges

Granier Sap Velocity Sensor

Dual Sap Velocity Sensor

Triple Sap Velocity Sensor

Maximum Upgraded System - Add:

AVRD

Range

2-3 V

3.5-4.5 V

3.5-5 V

5-7 V

6-10 V

2-5 V

7.5 V

8 V