Dynamax SAPIP-LTE Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Data Loggers Dynamax SAPIP-LTE. Dynamax SAPIP-LTE 10.

Section 1 — Connect to SapIP-LTE through TeraTerm



Connect antenna to SapIP and lay antenna

vertically next to a window.



Power on SapIP-LTE then connect it to PC

using provided black USB cable.



When looking down from top of the enclo-

sure, left window will show a yellow LED

blinking. The sequence is short-short-long-

long-short-short, then repeat one more time.

The blinking sequence happens every 30 sec-

onds under normal operation.



Right window will show a red LED blinking.

This is Digi LTE module LED which blinks four

times a second.



Run TeraTerm program from PC then select

associated COM port, click "OK".



Go to "Setup—Restore Setup" and navigate

to "C:\Program Files (x86)\teraterm" folder

and select "SapIP-TeraTerm.ini" file, click

"OPEN". The TeraTerm window will resize.



If you don't have the file available, download

it here.