Hideaway Beds Beta Bed King Manuale di istruzioni per il montaggio - Pagina 9

Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Arredamento per interni Hideaway Beds Beta Bed King. Hideaway Beds Beta Bed King 20. Wallbed frame and cabinet system

Stampa la pagina

Marking the Mounting Holes for the Lift Mechanism

STEP 2: Mount the Lift Mechanism

Note: Mount the Lift Mechanisms prior to assembly of the Bed Cabinet (STEP 4).

1. Exactly mark the mounting holes on the inside of each side panel from the dill pattern in Drawing 3.

2. Drill a 1/16" (2mm) pilot hole for each mounting bolt. Drill the final hole with a 5/16" (8mm) bit.

3. Counter sink 5/8" (15mm) on the outside of the panels just deep enough for the 5/16" x 1 1/4"

(8x32mm) Machine Screws.

NOTE: All location measurements are from the front edge of the Cabinet

Side Panels. Refer to Drawing 3.

Hole C

Hole D

Bottom Rear Base

Numbers in parenthesis ( ) are millimeters.

16.0" (406)

17 7/8"

(454)

11.0"

(279)

Drawing 3. (Drill pattern for SBLM Lift Mechanism)

2 5/16"

11 13/16"

(59)

(300)

17 9/16"

(446)

16 1/8"

(410)

14 7/16"

(367)

Hole A

Hole B

Hole E

FINISHED FRONT

EDGE OF PANEL

Front Bottom of Kick

BOTTOM EDGE OF PANEL