Dynamic GyroSet Manuale di configurazione - Pagina 13

Sfoglia online o scarica il pdf Manuale di configurazione per Sedia a rotelle Dynamic GyroSet. Dynamic GyroSet 13. Headset & dynamic controls

CONFIGURE HEADSET INTO MENU SELECT - PC

Recommended set-up for using Headset with LiNX. This set-up includes a Display remote (DLX-

REM400-B or DLX-REM500-A), the Input module (DLX-IN500-A) and an external drive stop switch.

The Gyroset™ Headset is connected into the Input module via a 9 pin D-Type connector, the external

switch is connected into the Display remote. For the purpose of instruction below I have used a DLX-

REM500-A remote.

Menu Select allows the user of the Headset to drive, operate seating and move between these

options (Functions) within the Headset Profile.

Note. With the system turned off, connect the modules before turning back on. An error code

(Flash code) will be displayed on the remote and in the configuration when read out.

•

STEP 1 - Open a Saved Program or Read a Program out of a chair

•

STEP 2 - Select Functions

Note must be in Bulk Edit Mode or working from a Saved File. The new Profile will be created below

current Profile.

•

STEP 3 - Click New Profile Icon

•

STEP 4 - Click within Profile Name edit window and enter Text 'Gyroset™Set'

•

STEP 5 - Click dropdown icon within Profile User Input and select 'Input Module'

•

STEP 6 - Set Menu Scan Enable to OFF

•

STEP 7 - Click on the Function to be duplicated (copied)

•

STEP 8 – Click the Duplicate icon

•

Step 9 – Click and hold the Function duplicated until the hash markings appear and drag into

the Profile created in Gyroset™Set

•

Step 10 – Repeat above if you want more than 1 Drive Function and for the Seat Functions

•

Step 11 – Click Chair Setup -> Modules -> IN500

•

Step 12 – User Input Configuration -> Select 'Proportional' from the dropdown menu

•

Step 12 – Write to chair