Gainwise SS1806-3G-H Manuale - Pagina 9
Sfoglia online o scarica il pdf Manuale per Apriporta Gainwise SS1806-3G-H. Gainwise SS1806-3G-H 17.
Stampa la pagina
Note:
*programming dialing in can't be used from telephones which are already programmed to open the door
when they dial the 3G Gate Opener.
* If the number is programmed to open the door but you still would like to use the same number to dial in
for programming, then you can disable Caller ID display (withhold the number) on the mobile.
8.2 Programming by text message
Programming by text message is the simplest way to customize the settings of the 3G Gate Opener and
add or delete telephone numbers. Simply send texts in the format to the telephone number of the SIM
within the 3G Gate Opener.
Note:
1.
A Single SMS text messages is limited to 140 characters.
2.
You can program many different user command codes in a single text message with SMS
format. *12*1234 # [command Code1] # [command Code 2] # [command Code3] #........
3.
Each SMS must start with the pass code , default 1234 in the following format *12*1234 #
Followed immediately by a command.
Program with the following format:
*12*1234#71[country code]#72[relay][phone number]#72[relay][phone number]#72[relay][phone
number]#......
Relay= 1 or 2
The passcode *12*1234 only needs to be put at the beginning of each new message.
Example:
Ireland Country code: 353 (UK: 44 / USA: 1) Do not use any leading zeros.
086 5683624 (mobile number 1)
086 5682554 (mobile number 2)
086 2235644 (mobile number 3)
SMS format:
*12*1234#71353#7210865683624#7220865682554#7210862235644#
To delete phone numbers of dialing in to open
SMS format: (to delete phone number 1 and 2)
*12*1234#730865683624#730865682554#
SMS format: (to delete all numbers)
*12*1234#73*#
After the numbers are programmed you can also send the text message to check the stored numbers by
sending SMS format *22*1234# , then the 3G opener will reply the phone number list text message.
3G Gate Opener
9/17
Revision V1.3B, Jan 2020
command