Gait up PhysiRun Live Manuale d'uso e parametri di risultato - Pagina 6
Sfoglia online o scarica il pdf Manuale d'uso e parametri di risultato per Prodotti per la cura della persona Gait up PhysiRun Live. Gait up PhysiRun Live 17.
Stampa la pagina
Start the recording
3.4.
To start the sensors, click on the "Start" button inside the application. The Physilog® LED
will become green for a short moment and then start to blink green, where each blink is two
short green flashes.
The best practice is to start the sensors when they are already attached to the foot just
before starting the test. The recording will start shortly after sending the start signal, during
a short synchronisation period the app ensures that sensors receive synchronisation signals
and when the countdown (3,2,1, Go) has arrived at "Go" you can instruct the subject to start
running. The displayed stopwatch will start at "Go" and stop when you press "Stop".
Running
3.5.
Gait Up's Running Analysis system was made to measure short running tests in straight line
and on flat ground, the available free space should be at least 10m of length. You can also
do the measurement outside if the local is small. When measuring several different protocols
or conditions you should do a measurement for each trial, that is: start and stop the recording
for each test.
The subject should not go further away than 15m from the tablet, otherwise the connection
between the sensor and app may get lost and the file transfer is interrupted. The tablet must
have internet connection to be able to upload the files to the server at the end of the
measurement.
Stop the recording
3.6.
To stop the recording click on the "Stop" button in the application. The sensors blink green
3 times, then twinkle orange. The data file transfer to the application is finalized while the
sensors twinkle orange. During this time do not close the application or stop the sensors via
the main button. Once the entire file sent to the mobile device, the sensors stop shining and
the files are uploaded to Gait Up's server where they are analysed. Shortly after you can
display the running report.
Between each start and stop of recording one file is created and stored on the tablet and on
the internal memory of the Physilog®5. The Physilog® stop recording once you click on stop
but stay connected to the application for quick start of the next measurement.
PhysiRun Live mobile user manual v1.3.1 Date: 02.05.2019
Copyright © 2018-2019, All Rights Reserved - Gait Up SA. CH-1015 Switzerland
EPFL Innovation Park, Bat C. CH-1015 Lausanne
Gait Up SA
www.gaitup.com
TVA CHE-145.136.760
6