Gait up PhysiGait Live Manuale d'uso e parametri di risultato - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso e parametri di risultato per Strumenti di misura Gait up PhysiGait Live. Gait up PhysiGait Live 19.

Stampa la pagina

5.3

Handling / Maintenance

Physilog®5 should be handled carefully. In particular, it should not receive shocks, such as

fall, crushing, being hit etc. Do not press too hard on the on/off button, this can damage the

button.

Warning: Do not use or charge the Physilog® if the sensor or its case is

damaged. Contact Gait Up about what further action is needed when the case

is damaged. In case the battery is damaged immediately move the device away

from flammable materials and contact Gait Up's customer support.



Sensors can be placed on the foot in any orientation, it will not influence gait

measurements.



You need to perform gait measurements with two sensors (one on each foot) when using

the application.



To benefit from the maximal battery life, fully charge Physilog® sensors before doing

measurements (LED shines green when connected to computer or charger, you can also

check the battery level with the App).



Physilog®5 can be used outside. Do not use Physilog®5 to measure water-sport

activities without additional waterproofing.



Storage: Store in a cool (0°C – 30°C) and dry place. The provided box is the perfect

place for your sensor.



Cleaning: Sensors can be cleaned gently using alcohol wipes. Before you clean the

device make sure it is turned off and disconnect all cables. Alcohol used in excess may

damage the sensor's waterproofing. Make sure to use wipes and not put liquid alcohol

directly on the sensor.



Sensors do not need yearly recalibration.



Do not throw Physilog® sensors in the normal trash, dispose of it properly considering

local laws and rules about electronic waste and batteries. Contact Gait Up's customer

support for more information about elimination of Physilog®.



Do not remove the "conf.bin" file from the Physilog, otherwise it will create empty files

(no sensor activated). If this happens, recreate a configuration in the Research ToolKit

software or contact Gait Up's customer support. For firmware v1.1.0 upwards, a default

configuration based on original configuration is created to compensate the removal of

the conf.bin file.



Do not introduce pointy objects into the small hole besides the USB entry, this irreversibly

damages the waterproofing of the sensor.

PhysiGait user manual v1.3.1 Date: 29.04.2019

EPFL Innovation Park, Bat C. CH-1015 Lausanne

Gait Up SA

www.gaitup.com

TVA CHE-145.136.760