HIDRIA 0314-4-0089 Manuale di istruzioni per l'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Ventilatore HIDRIA 0314-4-0089. HIDRIA 0314-4-0089 9. Fan with electronically commutated external-rotor motor

Stampa la pagina

OPERATING CONDITIONS

The fans are rated for S1 (IEC 60034-1) continuous operation.

Extreme ON-OFF switching operating must be avoided, because it has negative influence on life expectancy and power consumption.

Cycling operating mode should only with cycling ON/OFF via control signal (0/10V analog input or PWM input).

Do not cycling the power supply for cycling operating mode – use control signal! High 'In-rush current' can occur during cycling power supply!

Permissible ambient temperature is stated to the specified operating points - see appended 'Performance curves' for actual fan. If actual load deviates

from specified operating point, motor temperature-rise should be checked.

Figures on the motor name-plate refer to nominal values according to EN 60335 if not otherwise specified (EN 60335, 'free air', 'max.load', 'max.eff.',

cust. unit / cust. spec., UL, IEC 60034-1).

Continuous sound pressure level may exceed 70dBA (depends of fan model).

If an already installed fan is switched OFF for a long period in a humid atmosphere, it should be switched ON for minimum of two hours every month to

remove any moisture that may have condensed inside the motor.

Protection (motor & electronics): IP54 according to EN60529.

Power consumption in stand-by mode: les than 5W.

DIMENSIONS

Nominal diameter: 560 mm - see Appendix - technical drawing: VENTILATOR / R14R-56APS-ET60B-03B18

Weight: 13,4 kg

NOMINAL DATA - defined according to ' MAX.LOAD '

Phase: 3~

Nominal Voltage: 400 V

Operating Voltage range: 380-460 V

Frequency: 50-60 Hz

Input power: 600 W

Nominal current: 1,1 A

Rotational speed: 1150 RPM

Operating ambient temperature range: -25°C .. +60°C

Altitude: 2000 m

Insulation class: 130

Protection provided by PE: Class I

Overvoltage category (OVC): II

Operating humidity ambient: up to 95% (non condensing).

Max. pressure: 130 Pa

ErP DATA

Overall Efficiency, Effes: 50,2 %

Installation category: A

Efficiency category: static

Efficiency grade, N: 57,8

Variable speed drive: INTEGRATED

Power Input , Pelec: 630,1 W

Airflow volume , qV: 6608 m³/h

Pressure Increase, ps: 160 Pa

Rotational Speed, n: 1157 RPM

Specific ratio: 1,002

Airflow volume max., qV: 10141 m³/h

Pressure Increase max., ps: 359 Pa

USER'S GUIDE R14 AXIAL FAN , Code: 0000, Iss: 9.07.2019

An example of a label and explanation of the content:

1. Fan type and code

2. Trade mark and manufacturer address

3. Nominal values (Voltage, frequency, Electric Power, Current...)

4. Certification marks

5. Date of production (week of the year/year)

6. QR code which includes code number, production date, serial number and

link to website.

7. Data acc. to EU regulation 327/2011 (ErP)

8. NOTE INDICATE TO WHICH STANDARD/RULES CORESPOND DATA ON THE

NAMEPLATE:

- EN 60335-1 : Name-plate data are made according to standard EN 60335-

1, Household and similar electrical appliances – Safety – Part 1 :

10.1 If an appliance is marked with rated power input, the power input at

normal operating temperature shall not deviate from the rated power

input by more than: + 20% if Pn<300W or +15% (or 60W whichever is the

greater) if Pn>300W.

10.2 If an appliance is marked with rated current, the current at normal

operating temperature shall not deviate from the rated current by more

than: +20% if In<1.5A or +15% (or 0,30A whichever is the greater) if

In>1.5A.

- FREE AIR : Data on the nameplate established at a point 0Pa static

pressure.

- MAX LOAD : Data on the nameplate established at a point of maximal

static pressure regarding max. ambient

- MAX. EFF. : Data on the nameplate established at a point of maximal

static efficiency.

- CUST. UNIT / CUST. SPEC. : Data on the nameplate specified according to

customer specifications or at working point in customer's unit .

- UL - Data on the nameplate defined according to specifications in UL

standards.

- IEC 60034-1 - Data on the nameplate established at a point of nominal

load according to standard for Rotational electrical machines.

temperature

4 / 9