Dynamic CCTV MX16 Manuale di installazione e funzionamento - Pagina 3

Sfoglia online o scarica il pdf Manuale di installazione e funzionamento per DVR Dynamic CCTV MX16. Dynamic CCTV MX16 6.

Dynamic CCTV

Page 3 of 1

Ltd

DYNAMIC MX DVR PTZ SETUP AND OPERATION GUIDE

CAMERA ID it is common practice to assign an iD address to all telemetry devices that are connected to a

controller or DVR, this enables the control device to differentiate between the different connected device. Each

camera input has a default ID that matched the video input channel number but this can be changed if

necessary, simply click on the ID number that relates to the video channel you wish to change and this will

display a GUI keypad where an ID number between 1 and 255 can be selected.

NOTE: Each connected telemetry device should have its own unique ID, setting two devices to the same ID will

create a conflict and will cause problems when in use.

BAUD RATE This relates to communication bps speed and the below options can be selected.

NOTE: the above options 1) PROTOCOL, 2) CAMERA ID and 3) BAUDRATE must be set the same for each

device both at the DVR and at the telemetry device, failure to match up your settings will cause a loss of

communication.

DURATION This relates to the dwell time for each pre set when running the tour option (see below) the

storing of pre sets will be discussed later in this guide, to set dwell time simply click on the option for the

telemetry device for your chosen video input display dwell time options as below, the dwell time is configurable

from 5 to 60 seconds.

TOUR Our MX DVR rane is capable of storing and running two tour options each containing a maximum of

eight pre set positions, to set your tours simply click on the tour option for the telemetry device next to your

chosen video input and choose the SET option where you will see the below window appear: