Airdog X5 Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Pulitore d'aria Airdog X5. Airdog X5 8.
Anche per Airdog X5: Manuale (18 pagine), Manuale (8 pagine)

Stampa la pagina

Cleaning - Air Quality Sensor

Airdog air puriﬁer has an embedded air quality sensor. To keep the air quality sensor reading

correctly, please clean the sensor as illustrated every 6 months, using a dry non-abrasive cloth

or with rubbing alcohol and a cotton swab / Q-tip as illustrated.

Cleaning - Wire Frame

1. Clean the Ionization Wire Frame when the air puriﬁer makes abnormal sounds such as "popping,"

"cracking," "zapping," etc.

2. Use a soft cloth or sponge to clean the Ionization Wire Frame track by sliding back and forth gently.

3. Insert the Ionization Wire Frame in the direction the labeling indicates.

Cleaning - Fast Drying (FD) Collecting Plates (Optional)

1. Take off Dirt Collector from Seat. (Pic 1)

2. Separate the upper and bottom parts of Dirt Collector. (Pic 2)

3. Wash the 2 parts of Dirt Collector. (Pic 3)

4. Wipe and fully dry all surfaces and corners of the Dirt Collector with a clean, non-abrasive cloth.

5. Assemble FD Collecting Plates and put it back into the unit. Close the unit's back shroud.

Dirt Collector

Seat

Cleaning - Collecting Plates, Original (Optional)

1. Clean the collecting plates when needed and when the air puriﬁer displays "

2. Turn off the power, open the back shroud and pull out the collecting plates ( Pic 1 ) .

3. Put the collecting plates into a container and use a non-abrasive cleaning brush to clean the external sheet metal

ﬁnishing with water ( Pic 3 ).

Remarks：

A. It is better to use a neutral detergent and soak the plates for about 10 minutes before brushing. Do not soak for too

long in order to protect the normal functioning of the plates ( Pic 2 ).

B. Choose a neutral detergent. DO NOT USE an abrasive, acidic, or corrosive detergent (such as laundry powder, etc).

C. The surface of the sheet metal may have small stains; these will not seriously affect the use of the air puriﬁer.

4. Dry the collecting plates after cleaning. You can either use a hair dryer or natural sunlight ( recommend drying time is

over 24 hrs ).

5. Put the collecting plates back into the unit (once fully dried) in the direction the labeling indicates.