ActivePure A1040I Manuale - Pagina 6
Sfoglia online o scarica il pdf Manuale per Pulitore d'aria ActivePure A1040I. ActivePure A1040I 16.
OPERATION
CAUTION
Take your ActivePure
1.
and remove all protective materials.
Place your unit in an appropriate location which
2.
should be four feet or higher from the ground. Never
set it on the floor. Place in a location away from
the HVAC return duct. The rear of the unit requires
one inch or more of open area to allow unrestricted
airflow.
Insert the Power Supply Plug into the power
3.
receptacle on the rear of the unit. Plug the
appropriate cord into the Power Supply and into a
working electrical outlet.
Push the Power button once to turn the unit on.
4.
Push the A-PURE/A-PURE x2 button twice to set it
5.
to A-PURE x2 level which will be illuminated on the
screen.
Push the Fan + button four times to reach the highest
6.
speed (5th level).
SETTINGS & ADJUSTMENTS
The ActivePure Surface & Air Guardian can be turned on or off, and adjusted, using the control panel on the front of the unit.
NOTE: If you are operating your central heating and air conditioning fan or other ventilation system continuously, set
the coverage up to the total ventilated indoor area. Otherwise, set the coverage up to the size of the room.
POWER (STAND BY)
Turns the unit ON and OFF.
FAN UP/FAN DOWN
Adjusts the five speed fan.
A·PURE/A·PURE x2
Toggles the unit between A·PURE Mode
(ActivePure and Ionization) and A·PURE x2
Mode (2 ActivePure Cells and Ionization).
REMINDER RESET
Clears the maintenance reminders after
performing routine maintenance.
6
To prevent injury, be sure the power cord is not accessible to small children.
unit out of the shipping carton
®
A·PURE MODE: The unit's display shows the
•
fan speed (low to high) and A·PURE to indicate
that the ActivePure Cell and ionization are both
functioning normally.
A·PURE x2 MODE: A·PURE x2 lights up, indicates
•
that (2) ActivePure Cells and ionization are both
functioning normally.
ION MODE: Ion lights up, indicates only ionization
•
is functioning.
CLEAN: Clean illuminates when cleaning is
•
required.
RESET: Clears the maintenance reminders after
•
performing routine maintenance.
CELL: The Cell light will flicker when it is time to
•
replace your ActivePure Cell.
For best results, run your ActivePure Surface & Air
Guardian 24 hours a day, 7 days a week, giving you
the benefits of ActivePure day and night.
Reminder Reset
Power ON/OFF
Fan UP
x2
x2
A·PURE /
Fan
A·PURE x2
DOWN