ActivePure F170A Manuale - Pagina 10

Sfoglia online o scarica il pdf Manuale per Apparecchiature mediche ActivePure F170A. ActivePure F170A 16.

CLEANING/DISINFECTING AND FILTER REPLACEMENT INSTRUCTIONS (CONT.)

Step 10: Remove a Metrex CaviWipe from its package. Beginning by cleaning the surface "D". Wipe the CaviWipe over

the surface area, thoroughly wetting the soil. Wait 1 minute, then using hand pressure rub the wipe over the

surface until soil is no longer visible on this part of the device. If soil is heavy or is still visible, repeat step with a

new CaviWipe until soil is no longer visible.

Step 11: Remove a Metrex CaviWipe from its package. Beginning by cleaning the surface "E". Wipe the CaviWipe over

the surface area, thoroughly wetting the soil. Wait 1 minute, then using hand pressure rub the wipe over

the surface until soil is no longer visible on this part of the device. If soil is heavy or is still visible, repeat step

with a new CaviWipe until soil is no longer visible.

Step 12: Remove a Metrex CaviWipe from its package. Beginning by cleaning the surface "F". Wipe the

CaviWipe over the surface area, thoroughly wetting the soil. Wait 1 minute, then using hand

pressure rub the wipe over the surface until soil is no longer visible on this part of the device. If

soil is heavy or is still visible, repeat step with a new CaviWipe until soil is no longer visible.

Step 13: Remove a Metrex CaviWipe from its package. Beginning by cleaning the surface "G". Wipe the

CaviWipe over the surface area, thoroughly wetting the soil. Wait 1 minute, then using hand

pressure rub the wipe over the surface until soil is no longer visible on this part of the device. If

soil is heavy or is still visible, repeat step with a new CaviWipe until soil is no longer visible.

Step 14: Remove a Metrex CaviWipe from its package. Beginning by cleaning the surface "H". Wipe the

CaviWipe over the surface area, thoroughly wetting the soil. Wait 1 minute, then using hand

pressure rub the wipe over the surface until soil is no longer visible on this part of the device. If

soil is heavy or is still visible, repeat step with a new CaviWipe until soil is no longer visible.

Step 15: Allow the device to dry, no visible wetting remains. No rinsing is required. With the device

cleaned, it is ready for disinfecting.

DISINFECTING

Disinfectants are typically provided as a concentrate to be mixed with water or ready to use (RTU) with no mixing required. Use Clorox

Healthcare Fuzion Cleaner Disinfectant RTU in a spray bottle. As an RTU product, no mixing is necessary. Clorox recommended disinfectant

wait time is 1 minute with no rinsing required.

In Steps 16 - 24, spray Clorox Healthcare Fuzion Cleaner Disinfectant liberally on each surface until that surface is thoroughly wetted.

Step 16: Take the 8-quadrant wiping cloth from the filter carton, folding it as before so quadrant 1 is showing.

Step 17: Spray disinfecting solution over surface A. Wait 4 minutes, ± 5 seconds, then thoroughly wipe with the cloth folded to quadrant 1. Continue wiping