DBI SALA 1201380 Manuale di istruzioni per l'utente

Sfoglia online o scarica il pdf Manuale di istruzioni per l'utente per Attrezzatura di sicurezza DBI SALA 1201380. DBI SALA 1201380 8. Rebar lanyards for work positioning

Stampa la pagina

rebar lanyards for Work PosItIonIng

This manual is intended to meet the Manufacturer's Instructions as recommended by OSHA and

should be used as part of an employee training program.

WarnIng: This product is part of a work positioning system. These instructions must be provided to the user

and the rescuer (see section 8 Termonology). The user must read and understand these instructions before

using this equipment. The user must follow the manufacturer's instructions for each component of the system.

Manufacturer's instructions must be followed for proper use and maintenance of this equipment. Alterations or

misuse of this equipment, or failure to follow instructions, may result in serious injury or death.

IMPortant: If you have questions on the use, care, or suitability of this equipment for your application,

contact DBI‑SALA.

IMPortant: Before using this equipment, record the product identification information from the ID label into

the inspection and maintenance log in section 9.0 of this manual.

Center Connector:

Snap Hook or

Carabiner

Connects to Anchor

Lanyard Legs

Labels

Leg Connector:

Snap Hooks

Connect to

Harness or Belt

Center Connector:

Snap Hook

Connects to Anchor

Leg Connector:

Snap Hooks

Connect to

Harness or Belt

Instructions for the following series products:

User InstrUctIon ManUal

Figure 1 - Rebar Lanyards for Work Positioning

Lanyard Legs

Labels

Rebar Lanyards for Work Positioning

(See back page for specific model numbers.)