Autometers Systems A-400P Brochure di programmazione e installazione - Pagina 9
Sfoglia online o scarica il pdf Brochure di programmazione e installazione per Strumenti di misura Autometers Systems A-400P. Autometers Systems A-400P 17. Mid approved sgs.uk appendix b and d, measures kwh, kvarh, kvar,pf,hz, max demand, rs 485 modbus autometers v6 protocol, two pulse outputs, bi- directional measurement for import and export, back light lcd for full viewing angles, available as 1 phase 2 w
4.5 Supply System
The unit has a default setting of 3Phase 4wire (3P4). Use this section to set the type of
electrical system.
From the set-up menu, use
option. The screen will show the currently selected power supply.
Press
Use
1P2(W),3P3(W) ,3P4(W).
Press
Press
SET will disappear and you will be returned to the main set-up Menu.
4.6 Pulse Output
This option allows you to configure the pulse output. The output can be set to provide a
pulse for a defined amount of energy active or reactive. Use this section to set up the
pulse output—Units: kWh, kVArh
From the set-up menu, use
Output option.
Press
Use
On completion of the entry procedure, press
and press
4.6.1 Pulse Rate
Use this to set the energy represented by each pulse. Rate can be set to 1 pulse per
0.01kWh / 0.1kWh / 1kWh / 10kWh / 100kWh.
(It shows 1 impulse = 10kWh/kVArh)
From the set-up menu, use
Rate option.
Press
0.01/0.1/1/10/100kWh/kVArh per pulse.
Use
entry procedure, press
return to the main set up menu.
E
to enter the selection routine. The current selection will flash.
MD/
and
buttons to select the required system option:
P
PF/HZ
E
to confirm the selection. SET indicator will appear.
V/A
to exit the system selection routine and return to the menu.
ESC
E
to enter the selection routine. The unit symbol will flash.
MD/
P
and
buttons to choose kWh or kVArh.
PF/HZ
V/A
to return to the main set up menu.
ESC
E
to enter the selection routine. The current setting will flash.
MD/
P
and
buttons to choose pulse rate. On completion of the
PF/HZ
www.autometers.co.uk
MD/
and
P
buttons to select the system
PF/HZ
MD/
and
buttons to select the Pulse
P
PF/HZ
MD/
and
P
PF/HZ
E
to confirm the setting and press
E
to confirm the setting
buttons to select the Pulse
V/A
ESC
to
8