Celestron 95508 Manuale d'istruzione - Pagina 4

Sfoglia online o scarica il pdf Manuale d'istruzione per Fotocamera digitale Celestron 95508. Celestron 95508 9. Usb 3.0 astronomical cmos camera

CAPTURING IMAGES

Detailed Solar System images are created by stacking several individual images

or "frames" to one master image. The images are captured in video, allowing you

to accumulate hundreds of frames in just a few seconds. The video fi les will later

be exported to RegiStax and processed as shown in "Processing Images. "

Set up your telescope and point it at a bright target such as the Moon or

Jupiter. Center the target in your eyepiece, then remove the eyepiece.

Remove the diagonal if you are using one. Some refractor telescopes may

require an extension tube when used without the diagonal.

Plug the camera into your computer's USB port. If

equipped, use the USB 3.0 port on your computer,

which may also bear the USB SuperSpeed logo

(see right). When connecting the cable to Skyris,

use the threaded fasteners to provide the most

secure connection.

Insert the camera into the 1.25" eyepiece holder on your telescope as

shown previously in this manual, "Connecting the Camera to a Telescope. "

Locate the iCap shortcut on your desktop and open iCap.

Select your Skyris camera from the

Available Video Capture Devices

window and click OK.

The live video window will

automatically appear and

display the framerate. Gain and

exposure are set to automatic

by default, but you may need to

make adjustments for the object

you are imaging.

7 .

If a defocused image appears,

focus the telescope until it appears

sharp on your screen. If no image

appears, confi rm your telescope

is still centered on a bright object

and proceed to step 8.

Go to the Device menu and select

Properties. Click the Exposure

tab to access the Gain and

Exposure. Uncheck the Auto box

for each to allow for adjustments.

iCap 2.3