AGRIPO LARGE 250 KG Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Sistemi di sollevamento AGRIPO LARGE 250 KG. AGRIPO LARGE 250 KG 16. Electronic lift system

Installation / Start up

Remove the packaging material.

Take out the stainless steel disk

Lift off the electrical lift from pallet

When moving the electrical lift with a forklift, the elevator box must be

lifted about 100 mm so the forklift legs can be fully moved under electri-

cal lift

The electrical lift Large / Small should be placed against a fixed, straight

wall or similar to avoid displacement when installing or removing pallets

or containers on wheels.

Attach the rubber band on the right and the left side.

Install the pallet or roller leg extensions at the right and left sides of the

elevator box.

Install the waste box from behind under the stainless steel disk.

Grounded power plug is located on the upper left side. Cable length app-

roximately 1,20 m.

10. Grounded power outlet 220/230V with ground fault switch and 10A fuse.

Placement is recommended approximately 2100 mm above floor level.

11.

Turn the operating switch to position 1 to run the elevator box fully down.

12. Install a pallet or roll in a container on wheels manually (not using a fork

lift)

13. Turn the operating switch to position 2 to run the elevator box to the

upper position.

14. Put the stainless steel disk in front of the dispenser and fix it by using the

rubber band.

15. Open the hatch or cut open the octabin bottom about 140 mm high.