CELETTE CEL.11245-C-02 Manuale originale - Pagina 9
Sfoglia online o scarica il pdf Manuale originale per Sistema di saldatura CELETTE CEL.11245-C-02. CELETTE CEL.11245-C-02 15.
Stampa la pagina
3.3 CONTROLS ON GENERATOR FRONT PANEL:
A
B
D
F
G
C
E
H
A. Output power adjustment for stud welding
B. Connection indicator
C. Socket for work clamp
D. Socket for torch
E. Control socket for torch
F. Power switch
G. Fuse
H. Input power cable (Confirm the power voltage before use)
3.4 OPERATING PROCESS FOR STUD WELDING:
NOTE: Protect your eyes and your body when stud welding. Please operate the machine as follow.
3.4.1 PREPARATION FOR OPERATION:
1. Keep the work piece free of dirt ,oil, paint and rust.
2. If the base metal is thin, it will dent at pressure. It must add a base plate, when stud welding.
3. Select suitable stud welding torch, according as material, diameter, length of the stud screw.
4. Make sure the diameter of the clamp is correct and the length of the gag lever post is correct.
Install the screw clamp and gag lever post in the torch.
5. Make sure all the cables connect to the machine and workpiece. Connect input cable and turn on.
www.celette.com
Page No: 9