activeshop Activ Power J202 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Trapano activeshop Activ Power J202. activeshop Activ Power J202 14. Nail drill

Stampa la pagina
Replacing the drill bit
1.
Rotate the handle clockwise until you hear a click.
2.
Take out the drill bit.
3.
Insert the desired drill bit into the same place.
4.
Rotate the handle in the opposite direction to lock the drill bit.
5.
You can use the drill bit.
Using a nail drill
1.
Switch the power switch to position "1".
2.
Slide the switch "on/off/foot control" to "on" for manual control. The power LED
will light up and the drill bit will slowly rotate.
3.
Change the rotation speed with the potentiometer to the right to increase the
speed. Make sure you set your speed within a reasonable range.
4.
When the switch is set to foot control, press on the foot switch and the drill bit
will start to rotate according to the speed set on the potentiometer.
5.
Reposition the head direction switch to change its direction.
Warning:
Always start operating the device at minimum speed.
Make sure you set the drill bit to the minimum speed before changing its
rotation direction.
If the power light does not light up during use, check the fuse and replace it if
necessary.
Allowable rotation speed
Remark!
Always turn off and unplug
the machine before
changing the drill bit.