Dynamic Precision BPC 7.3 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Unità di controllo Dynamic Precision BPC 7.3. Dynamic Precision BPC 7.3 11. Passive balanced stereo control unit

Stampa la pagina

Balanced cables

BPC 7.3 is fully balanced from input to output. Balanced signal sources shall always be connected using

balanced cables as shown in figure 3. The benefit of a totally balanced system is that any noise

superimposed on the signal paths will be cancelled on the input. On the other hand, when using an

unbalanced system there is no control of the noise in the system. This may cause high level of out-band,

high frequency signals to be applied on the input terminals. Such high frequency signals could causes the

amplifier to be loaded by high output currents which may increase the inter-modulation and result in an

audible reduction of the overall sound quality.

Ubalanced cables

BPC 7.3 can not be used with unbalanced power amplifiers. Unbalanced signal sources may be connected

to BPC 7.3 using a "special cable" comprising two inner conductors and a shield. All conductors shall be

terminated in both ends as shown in figure 4.

Authorised dealers of Dynamic Precision's products can help and advice you how to choose the

proper cables to be used.

XLR-Female

RCA-Male

BPC 7.3

AUDIOCABLES

Figure 3.

Balanced to balanced XLR-cable.

Figure 4.

Unbalanced to balanced cable.

CABLES AND CONNECTIONS

XLR-Male

Page 6