Hidrotermal ARS-12.5 Manuale di installazione e manutenzione - Pagina 10
Sfoglia online o scarica il pdf Manuale di installazione e manutenzione per Distributore d'acqua Hidrotermal ARS-12.5. Hidrotermal ARS-12.5 12. Automatic residential softener
※Press "
" and turn into Fast Brine status, starting to Fast Rinse. About 3 minutes fast rinse will
discharge the residual brine and compact the resin particle so as to reach the best softening effect.
※When the sample outlet water is qualified, press"
turns into Service status and start running.
Illustration: Under regeneration cycle, the softener water will stop flowing out from the outlet and
each status will be completed automatically according to the setting time. If you want to finish one
step in advance, you can press"
※During the trial running status,check each port. There should no mineral media flow out.
Check each connection, ensure there is no leakage.
※The time of backwash, brine& slow rinse, brine refill, fast rinse, etc.could be suggested by dealer
or professional personnel.
Notice: Under normal situation, user does not need to do any operation except adding a
certain amount of salt into the brine tank.
9. Notice
Before reading and understanding the user manual, please do not operate the device.
※Before installation and rial test the product, please take out the spare parts kit and filling material
from the cabinet(See the below picture).
※ To ensure normal operation of the product after installed, please consult with professional
installation or repairing personnel before use it.
※Forbid installing the device near heat source or take anti-heat protective measures when install
near the heat source. It is also forbiddden to connect the device with the hot-water pipeline or the
pipeline with the possibility of hot-water returning. Forbid the product under the temperature lower
than 1℃. Protect resin from freezing which may result in resin broken and disabled.
03:25:50
Water System
Fast Rinsing...
Remaining: 5 min.
12:30:25
Water System
In-Service
Water
Remaining: 2.56m
3
Cur.F.R.: 0.85M
/h
3
"
Fast Rinse Status
" and finish the Fast Rinse. Then the device
Service Status
Take out
Spare parts kit
Filling material
8