Celexon HomeCinema Electric Tension screen Manuale di istruzioni per l'uso - Pagina 7
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Schermo di proiezione Celexon HomeCinema Electric Tension screen. Celexon HomeCinema Electric Tension screen 14.
Anche per Celexon HomeCinema Electric Tension screen: Manuale operativo (11 pagine)
Stampa la pagina
MOUNTING ON THE CEILING (SCREWED)
ATTENTION! Make sure that you have a load-bearing surface
1.
For mounting on a solid stone/concrete ceiling, please use the plastic do-
wels (i). Draw a line to install the two mounting brackets in alignment. Use
the mounting brackets as a template and mark the holes with a pencil.
Then drill the holes with a drill according to the markings and insert the
dowels into the holes (the dowels must sit tightly in the holes). Fasten the
mounting brackets to the ceiling with the screws (c).
2.
Now lift the screen housing with two people and insert it carefully into
the mounting brackets. Make sure that the housing profiles engage in the
hooks of the mounting brackets. Now let the housing slowly downwards
and do not let go until the housing is actually held by the bracket (in both
hook lugs).
1. Hold the housing in
front of the bracket
and push it from below
so that the upper edge
goes against the top of
the bracket.
2. Push the housing to-
wards the wall until it is
noticeably on the hooks
3.
As
soon
as
housing is securely on
the bracket, turn the
lower
safety
clockwise
to
tighten
the bracket. This clo-
ses the bracket and the
housing is moved a litt-
le upwards.
the
screw
6