Automotive Data Solutions TR2310A Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Avviamento a distanza Automotive Data Solutions TR2310A. Automotive Data Solutions TR2310A 12.

1. Unlock and enter vehicle

2. Close doors

3. Insert key into ignition and turn ignition to ON position

4. Press foot brake

For Push-To-Start Vehicles

1. Unlock and enter vehicle with valid smartkey

2. Close doors

3. Press foot brake

NOTE: This feature may not be supported on some vehicles. If available, the programmed 'key takeover' delay

time will be communicated to you by your iDataStart Authorized Dealer at the time of installation.

WHEN SERVICING YOUR VEHICLE

To ensure safety during vehicle servicing, the remote starter must be placed in 'Valet Mode'. The 'Valet Mode'

will disable remote start functionality. To activate or deactivate the 'Valet Mode', follow the instructions below:

With Vehicle Key:

Cycle ignition OFF/ON 2x rapidly, then press brake 3x.

FUNCTION

Valet Mode ON

Valet Mode OFF

With iDataStart Antenna:

Turn ignition ON, then press & hold button for 5 seconds

FUNCTION

Valet Mode ON

Valet Mode OFF

REMOTE START TROUBLESHOOTING

If your iDataStart remote fails to start the vehicle, the parking lights will ﬂash three times immediately, then

# OF PARKING LIGHT FLASHES

TR2310A