Dynamic Projection MH29 Manuale di installazione rapida - Pagina 3

Sfoglia online o scarica il pdf Manuale di installazione rapida per Accessori per proiettori Dynamic Projection MH29. Dynamic Projection MH29 8. Mirror head

Stampa la pagina

Mirror Head Quick Installation Guide

For the full manual please visit

Technical specifications

High resolution 16bit Pan/Tilt mirror movement

DMX-512 control over 14 DMX channels

DMX-IN and DMX-OUT/Through port (5-pin male and female XLR connectors)

14 DMX channels are required to control the unit

Art-Net™ connection (RJ45) (Art-Net™ designed by and Copyright Artistic License Holdings Ltd.) - OEM code 0x1140

High resolution micro step motors with maintenance free direct drive

Self calibrating mirror position for high accuracy

Absolute reposition accuracy smaller than 0.03°

Movement accuracy: Pan and Tilt from the same direction to the programmed point within approximately 0.01°

RS232 remote control connection for projector (D-sub 9 male) - cable included

Flash-able firmware (Mini USB OTG)

High resolution LED-Display for easy configuration

LED-Display back-light auto turn off for energy saving

LED-Display Flip / Flop mode for easy reading in difficult positions

Coated mirror for optimum reflection ~98% refraction factor

Optimized mirror optics for the specific projector

Ambient Light LED with high power RGB LEDs (17 ,9 Watt total) - see compatibility list if available for your model (MH08-MH13)

Mounting plate optimized for specific projector mounting

Easy to adjust mounting system

Passive cooled system (excluding projector)

Environmental tolerances: Ambient operating temperature range: 5°–35°C, Humidity: 20%–80% (non-condensing)

A/C power input; 100V / 2A / 60Hz – 240V / 1A / 50Hz, 10A max. 3-prong C14 male socket - 3W Standby - max. 30W

(see type plate on device for details)

Examples of positioning the Mirror Head

http://dynamicprojection.com/mirror-head-assembly

~90°

Default Mode

The illustrations show the approximate usable angular range of the projection

cone depending on the operation modes. The shown ranges may differ depending

on the lens-shift and blocking parts of the projector or mounting constructions.

The modes can be set in the firmware of the Mirror Head using the „Mirror

angle" menu.

Default Mode („90 Degrees"), this is the „90° Tilt" mode available on all Mirror

Head models.

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.

~180°

Default Mode

QIG - Version 2.6